Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

DAX and VOX work until Slice TX is switched

Wayne, W5XD
Wayne, W5XD Member
edited March 2017 in SmartSDR for Windows
The short summary: with two Slices set for Transmitting DAX audio, switching which is the one with the TX indicator breaks the VOX function (that is, sound sent to their corresponding Windows Playback devices won't trip the radio into transmit mode.) The VOX can be restored by a click on SmartSDR's "MOX" button.

For a specific scenario:
v1.4.16 SmartSDR
Flex-6500 radio
Configure DAX Control Panel for both DAX channel 1 and 2, and for both RX and TX (i.e. both rows in DAX Control Panel have a blue digit and a red TX).
Configure SmartSDR with Slice A on DAX channel 1 and Slice B on DAX channel 2.

(radio should be on a dummy load here....)
Send audio on the PC to DAX Audio TX 1 playback device. If the VOX trips, you're temporarily in good shape.
Click the TX button on Slice B's Flag.
Send all the audio you want to its device, DAX Audio TX 2, and the VOX won't trip.
"Fix" it by briefly clicking the MOX button. Now VOX works.
Break it again by clicking the TX button in the other Slice...

Thanks,
Wayne

Comments

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    I have entered this report into our bug tracker for further investigation.  Please report any additional information related to this specific issue in this community topic.Thanks for entering the report and the steps to reproduce it.
  • nd4g
    nd4g Member
    edited December 2022
    I just came across this thread. It seems old, but I have the same issue with my 6600M. My workaround is to toggle the VOX button off, then back on, and it appears to start working. Running SmartSDR 3.3.33.
    Rich, ND4G

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.