D-Star Transmit Issue

  • 1
  • Problem
  • Updated 1 month ago
I'm using a Flex 6300 and a newly constructed Elecraft XV144 transverter, and am trying to connect to the local D-Star repeater, but am not having any luck.

I can receive just fine, so I assume the dongle is working properly. When I transmit, I don't seem to be getting out on the repeater, and when the repeater replies with its data, the "called" field is blank.

I've attached a screenshot of the DSTAR Waveform window. The first item is the response from the repeater after my transmission.

Does anyone know what I might be doing wrong? Thanks!

Photo of Ben Sinclair

Ben Sinclair

  • 28 Posts
  • 0 Reply Likes

Posted 2 years ago

  • 1
Photo of Alex - DH2ID

Alex - DH2ID, Elmer

  • 840 Posts
  • 150 Reply Likes
1. Do you have a portable D-Star TRX or an OM with D-Star near you?
    What does it show if   you contact it or him directly?

2. What does http://www.dstarusers.org/viewrepeater.php?system=KD0IAN show?

Your repeater does not show your callsign. Are you sure you transmitted on the correct frequency and with the correct settings?



73, Alex DH2ID
(Edited)
Photo of Mark - W3II

Mark - W3II

  • 112 Posts
  • 31 Reply Likes
The following link walks you through registering your call sign with DSTAR.

http://www.dstargateway.org/D-Star_Re...
Photo of Ben Sinclair

Ben Sinclair

  • 28 Posts
  • 0 Reply Likes
I am registered, and have been on D-Star many times before with my 51 and 7100, but I no longer have them to test with.

If I wasn't on the correct frequency, I wouldn't think it would respond at all. I did listen on the input frequency using another non-D-Star radio, and I can hear myself (the data stream anyway).

I have a buddy that can help listen and see what he gets, so I'll try that next!
Photo of Mark - W3II

Mark - W3II

  • 112 Posts
  • 31 Reply Likes
I am connected to KD0IAN C with a DV Dongle if you want to try again. 
Photo of Ben Sinclair

Ben Sinclair

  • 28 Posts
  • 0 Reply Likes
I'll try again right now!
Photo of Ben Sinclair

Ben Sinclair

  • 28 Posts
  • 0 Reply Likes
I just called again, and I saw the repeater come back with the blank "called" field. Did you see anything?

C is connected to the reflector, so I waited until those guys were done talking first!
Photo of Mark - W3II

Mark - W3II

  • 112 Posts
  • 31 Reply Likes
No I dd not see your call sign appear.
Photo of Ben Sinclair

Ben Sinclair

  • 28 Posts
  • 0 Reply Likes
Well, I'll give it a try on simplex with a friend and see what we get. Thanks for looking for me on there!
Photo of Lawrence Kellar KB5ZZB

Lawrence Kellar KB5ZZB

  • 183 Posts
  • 25 Reply Likes
I had to set my Tx eq to OFF for my repeater to recognize me
Photo of Ben Sinclair

Ben Sinclair

  • 28 Posts
  • 0 Reply Likes
Wow, that did it! Thanks!
Photo of Alex - DH2ID

Alex - DH2ID, Elmer

  • 837 Posts
  • 150 Reply Likes
Yeah, that was an easy solution that I totally missed ;-)
I have a D-Star profile without equalizer. 73 es HNY!
Photo of Ron Parsons

Ron Parsons

  • 70 Posts
  • 10 Reply Likes
I am having the same problem. My system is a Flex-6500 with a DEMI 2m transverter. When I press PTT, my system transmits on the repeater input frequency, but the repeater does not send any output until I stop transmitting, and then the repeater transmits a short burst with the called field filled with *******.

My guess is that the transverter has a short delay in producing output and the first few bytes of the packet might be dropped.

I turned off TX EQ but no luck.

Ron W5RKN
Photo of Lee Maisel

Lee Maisel

  • 90 Posts
  • 12 Reply Likes
The radio or dongle, or software, whatever is TRUNCATING the beginning of the transmission, in other words, your ID string at the beginning of transmit is being generated, but the radio is late in transmitting, so that portion ends up not sent.   The repeater rejects it because there is no ID.  Hence the ************  AN aggravating problem that I would love to see resolved.  Maybe flex can fix this top where there is a short 1/2 second delay buffer to ensure all is transmitted?????
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 8296 Posts
  • 3093 Reply Likes
I have entered this problem report into our bug tracker as issue #4613 for additional investigation. Thank you for the defect report.
Photo of Cal Spreitzer

Cal Spreitzer

  • 280 Posts
  • 52 Reply Likes

Tim,

FYI,  I reported this problem 3 months ago...  it was assigned bug tracker issue #4400.  Here is link to my thread regarding this:

https://community.flexradio.com/flexradio/topics/hf-dstar-with-ssdr-beta-v1-10-8-issue

This all is related and I'm eagerly awaiting disposition. 

Best regards,

Cal/N3CAL


Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 8296 Posts
  • 3093 Reply Likes
I have linked the two reports in the bug tracker.
Photo of Lee Maisel

Lee Maisel

  • 90 Posts
  • 12 Reply Likes
Hi, It's been almost a year.  Is this EVER going to be fixed?  All it would take is a small change in the D-star waveform to delay sending for a half second or so (possibly even less) after exciting the transmit.   It's obviously chopping it off before it gets out.  Otherwise, I merely wasted money on the dongle I purchased from you,.
Thanks!