CWSkimmer does work using DAX....but

  • 1
  • Idea
  • Updated 4 years ago
You must choose the CWSetting>Radio>3-kHz Radio
and then two DAX ports,
DAX, Audio RX1
&
DAX, Audio TX1

I think you can choose a different pair but these worked for me.
You don't get the big bandspread, but it does copy the cw accurately.
You loose the ability to click on a station to qsy the transmit freq.

Tim told me how to do it.
Photo of Bill-W9OL

Bill-W9OL

  • 726 Posts
  • 56 Reply Likes

Posted 4 years ago

  • 1
Photo of Greg

Greg

  • 656 Posts
  • 63 Reply Likes
Can't you create another dedicated port and set the CAT option in CWS?

Greg
Photo of W5UN_Dave

W5UN_Dave

  • 315 Posts
  • 30 Reply Likes
This is unacceptable. CWskimmer needs to show the extended spectrum of cw signals, not the very limited 3-khz range. What's it going to take boys?
Photo of Al / NN4ZZ

Al / NN4ZZ

  • 1655 Posts
  • 564 Reply Likes
Dave,
We shouldn't have to wait long. IQ support for 96K is coming in V1.1 in January according to the road map.

Regards, Al / NN4ZZ
Photo of Greg

Greg

  • 656 Posts
  • 63 Reply Likes
I hope IQ support extends to at least 192 kHz in the future. 96 is not enough.

Greg