CwSkimmer 6300

  • 1
  • Problem
  • Updated 2 years ago
  • Solved
I am running at Flex 6500 and a Flex 6300 different QTH and the settings are exactly the same and should work as it sits.

What I am seeing is that when I start SDR Bridge and skimmer the 6300 goes instantly into transmit.  The only way to stop it is by shutting the radio down,  The MOX button is lit and hitting stops the transmit for about as long as you hold the button down.  It then returns to transmitting.

Not sure what I am missing but any thoughts would be helpful

Mike
N9DFD
Photo of Mike Hoing

Mike Hoing

  • 265 Posts
  • 42 Reply Likes

Posted 2 years ago

  • 1
Photo of Andrew O'Brien

Andrew O'Brien

  • 381 Posts
  • 43 Reply Likes
That is NOT happening here with my 6300 , are you sure the SMARTSDR CAT settings are correct ?
Andy K3UK
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3478 Reply Likes
I suspect a problem may be with the CWSkimmer IQx.ini files SDR-Bridge uses since SDR-Bridge is telling the radio to go into transmit.

Also, make sure you have the latest version of SDR-Bridge loaded too.
Photo of Mike Hoing

Mike Hoing

  • 265 Posts
  • 42 Reply Likes
Skimmer 1.91 and bridge 1.5.1.  They should be the latest  its working on the 6500 not the 6300.

I suspect your right with bridge and skimmer as I have turned on TX inhibit in the settings and I can copy fine

I will uninstall bridge and skimmer and reinstall it.

Mike
Photo of Mike Hoing

Mike Hoing

  • 265 Posts
  • 42 Reply Likes
Ill try that because a straight reinstall did not work

Thanks Tim
Photo of Mike Hoing

Mike Hoing

  • 265 Posts
  • 42 Reply Likes
That Did it

Thanks Tim and have a great holiday

Mike
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3478 Reply Likes
:-)
Photo of Dan -- KC4GO

Dan -- KC4GO

  • 339 Posts
  • 68 Reply Likes
Tim, You're OK don't care what they say about you :)
Thank for all you do. If you're travailing today BE SAFE.
73's Dan
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3478 Reply Likes
Thanks, Dan.  Here is wishing a happy and safe Thanksgiving to everyone.