CW Delay for external Keyer

  • 1
  • Problem
  • Updated 5 years ago
  • Solved
Good morning "E"!

The control to use an external keyer vice internal in the past version was turning off IAMBIC. Delay should work for both the internal and external keyers. Most external keyers do not have their own programable PTT key line. All other radios, including other Flex rigs, have the delay line effective on external and internal keyers. Prior to the latest version I could set the delay to 350 ms and it behaved as you would expect. I only had to unselect IAMBIC to use the external keyer.

Until the improved QSK is available I like to use the semi-breakin function as I have been. Even when QSK is available, I only use it when dxing or contesting. :)

Tnx
Greg

Note: This topic was created from a reply on the CW Delay setting not working topic.
Photo of Greg

Greg

  • 656 Posts
  • 63 Reply Likes

Posted 5 years ago

  • 1
Photo of Greg

Greg

  • 656 Posts
  • 63 Reply Likes
There is a bug after talking with Eric that will be fixed (I think it already is) in the next release. Delay will be triggered with the break-in button and should work on internal and external keying. It worked on both before the last update. I think it applies to the original topic. Thanks!
Greg