Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Current Fix For Maestro That Will Not Work With SmartLink

NK9E
NK9E Member
edited March 2018 in New Ideas
You need to take your Maestro to ANY Flex radio with 2.1.33 installed on it. ( you do NOT need to drive 400 km, etc. )

At least this worked for me.  After doing every thing in Flex documentation relating to the 2.1.33 "fix" I read Mr. Abeds' post -- took a chance and drove my Maestro to the nearest 
Flex I knew of -- which I verified had uploaded 2.1.33.106.

I then connected my Maestro to the LAN the radio was on, and made sure my Maestro could see that radio.  I then powered down and up the Maestro, and typed in the credentials for the remote Flex I wanted to connect to and operate through SmartLink.  It worked! 



Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.