COMP on the 6300?

  • 1
  • Question
  • Updated 4 years ago
  • Answered
In the "SmartSDR for Windows Software User's Guide". It mentions, in a couple of locations, about Turning the COMP on and off and how to go about adjusting it. Is this with only the 6500 and 6700? I'm using the 6300, with SmartSDR V1.3.8.126 and I'm not seeing a COMP button anywhere. For most of the rest of the manual it states clearly if something is a 6700/6500 only option... This does not.

Page 65
7. Turn on the TX compressor/expander with the COMP button. The compression slider controls
the Compression Threshold. At the minimum setting, the threshold is 0 dB while at max the threshold is approximately -33 dB. The compression ratio is fixed at 5:1 while the downward expander set for a threshold of -45dB with a ratio of 4:1. 

Page 124
● Compression bar meter: This meter shows the real-time level of compression being applied to the input signal when the audio compressor (COMP) is enabled.
Photo of N1NAZ Geo M.

N1NAZ Geo M.

  • 1 Post
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Jay / NO5J

Jay / NO5J

  • 1514 Posts
  • 222 Reply Likes
Official Response
COMP got renamed/relabeled PROC. when the Processor code replaced the Compressor code.
The manual lags a little, the buttons in the same location on the compresser panel.

73, Jay - NO5J
(Edited)