CAT program not seeing ports

  • 2
  • Question
  • Updated 5 years ago
  • Answered
CAT is not showing any ports in the "Connect to 3rd Party" list. I have rebooted, done peer to peer, removed, installed and several other tries with no help.

Any one else have this issue

Paul, KE5ZW
Photo of Paul

Paul

  • 0 Posts
  • 0 Reply Likes

Posted 5 years ago

  • 2
Photo of K4ELO

K4ELO

  • 95 Posts
  • 16 Reply Likes
Same problem here. Version 1.2.2.0 running with 1.0.24.22 SmartSDR
Photo of Reggie-k6xr

Reggie-k6xr

  • 413 Posts
  • 32 Reply Likes
I have the same problem as noted in an earlier post. running the latest beta
Photo of Reggie-k6xr

Reggie-k6xr

  • 413 Posts
  • 32 Reply Likes
I have worked on this with many installs and uninstalls and reboots and CAT does not work anymore. I show Flex vitual port 4/14 in device manager but CAt does not show comport for third party programs after all the work!
Photo of Reggie-k6xr

Reggie-k6xr

  • 413 Posts
  • 32 Reply Likes
I went back to version 1 and all is working just fine now. not sure what happens in the beta but this version is working great! Problem solved albeit a former version
Photo of Reggie-k6xr

Reggie-k6xr

  • 413 Posts
  • 32 Reply Likes
Today deleted version 1 and reinstalled the beta 3 times before it all came together and worked! so, no more problems
Photo of Bob G   W1GLV

Bob G W1GLV

  • 654 Posts
  • 109 Reply Likes
Yes, I reported this problem earlier.
Photo of Ernest - W4EG

Ernest - W4EG

  • 594 Posts
  • 116 Reply Likes
To solve this issue, just delete Smart CAT and re-install it.
Delete any and ALL CAT off your computer desk top.
If you try to do a fix CAT; that does not do it either.
I have become an expert in this area: HRD force me to do this several times.

This conversation is no longer open for comments or replies.