Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

CAT Won't Open

Fred-NA2U
Fred-NA2U Member ✭✭
Running Smart SDR v.1.10.16 and CAT v1.10.16.  CAT worked yesterday, it won't open today. 

Suggestions?

Comments

  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
    First thing I can think of is that it may not have closed correctly last time.
    Open Task Manager and look to see if it is still open in that list.  If so, close it.

    Then reboot your computer just to make sure things are cleaned up.

    If that doesn't help, then you may need to reinstall the CAT drivers
    You can follow this procedure:

    https://helpdesk.flexradio.com/hc/en-us/articles/205665325-How-to-Repair-the-FlexVSP-Virtual-Serial-...

    Good Luck,

    Ken - NM9P
  • Jim Gilliam
    Jim Gilliam Member ✭✭
    edited September 2017
    Click on CAT icon. If it says radio not connected in red, click on it. You should see the radio if it's registered and on line. Click connect, and see if it connects.
  • Fred-NA2U
    Fred-NA2U Member ✭✭
    edited September 2017
    I will add that when I hovered the mouse over the CAT icon on the task bar it showed no open window, so it wasn't 'hiding' somewhere.

    Even though I had rebooted twice yesterday with no effect when I booted this morning CAT opened at startup as usual.  Just a little spooky but it's working again.  Thank you for your suggestions.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.