Can't get brand new Maestro to work

  • 1
  • Problem
  • Updated 9 months ago
  • Solved
First day with Maestro. First thing I tried was connecting direct to 6300 with supplied CAT 5. Maestro didn't see radio. Then hooked radio to lan switch for WiFi system, and hooked Maestro to same switch. Maestro saw WiFi system and I supplied password, and it connected, and although it listed my radio, it would not connect to it. I turned off everything and went to bed. Next morning, I turned on everything, and it worked right off the bat!! Played around on the bands, just listening, and after an hour or more, it suddenly died. After many tries, it refuses to connect to the radio. When Maestro shows my radio, I try to connect, and it then says no radios found. Sometimes it just comes up with that message. When it was working, the Network window showed IP Address, Mask, and MAC Address information. When it doesn't work, none of that information shows. It Always shows that it is connected to my WiFi system. Any help for this dummy?
Photo of Fred Lindsey

Fred Lindsey

  • 7 Posts
  • 1 Reply Like

Posted 9 months ago

  • 1
Photo of Fred Lindsey

Fred Lindsey

  • 7 Posts
  • 1 Reply Like
Official Response
I finally got everything up and going. Turns out, the problem was caused by old software/hardware version on the 6300. Never updated, because it was working so well. Did upgrades, and now all okay. Now I'll have to try to get ver. 2 up & running.
Thanks for the help,
Fred  WA7NRX