works with older version
Posted 8 months ago
Most likely, as Andy pointed out, this will be related to the new TX Band Settings... dialog in V3 which looks like:
I found a couple times in various profiles that my ACC TX was not checked for the band I was on.
Mark
I found a couple times in various profiles that my ACC TX was not checked for the band I was on.
Mark
Have everything checked as in your video how ever still the same . looks like a verry small level of power to amp not the pow required for amp (40) watts The table you have shown, I have 100 watts inserted.
Are you using ALC? I do not. I have had serious issues with ALC doing strange things.
You are on 3.x... Are you running multi-client? IE running both SSDR on a PC and on the M maestro screen?
If so check that PTT is enabled for the client where you are trying to drive the amp from.
Prior to 3.x release I had a moment of terror when I was not getting any power to the amp when I hit tune or used the paddle in CW. Turned out local PTT was not enabled for the client I was working on.
This is also under the setup menu.
You are on 3.x... Are you running multi-client? IE running both SSDR on a PC and on the M maestro screen?
If so check that PTT is enabled for the client where you are trying to drive the amp from.
Prior to 3.x release I had a moment of terror when I was not getting any power to the amp when I hit tune or used the paddle in CW. Turned out local PTT was not enabled for the client I was working on.
This is also under the setup menu.
Not using alc, selected RCA TX! Now working Tnx much. Old age got to me 73