cannot connect maestro to remote radio.

  • 1
  • Problem
  • Updated 9 months ago
Cannot access my 6300 via Smartlink with Maestro.  I can access with Smartsdr but it disconnects after 30-45 seconds I can reconnect but same results. Running 2.1.32.
Photo of Buford, W4HVW

Buford, W4HVW

  • 23 Posts
  • 2 Reply Likes

Posted 9 months ago

  • 1
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 3002 Posts
  • 660 Reply Likes
you must upgrade to V.2.1.33 to use remote... when you do simply re register.
(Edited)
Photo of Buford, W4HVW

Buford, W4HVW

  • 23 Posts
  • 2 Reply Likes
In September  I took the maestro to the remote site and left the 6300 at home. I was able to connect and make contacts.  I was using 2.1.19
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 3002 Posts
  • 660 Reply Likes
Buford, that was back when everything was working, last month a problem happened and Flex had to fix it at their end with the release of v.2.1.33  You not likely be able to connect until you upgrades.
(Edited)
Photo of Larry: KE2YC

Larry: KE2YC

  • 66 Posts
  • 5 Reply Likes
Hi Buford

The new v.2.1.33 has new fix for smart link. The older versions will not work with smartlink. They have taken them down from the board for that reason. So if you want to use smartlink you will have to use v2.1.33

Ke2yc. larry