Can I Run Two WSJT-X Sessions simultaneously say one on 6meters & other on 20meters

  • 1
  • Question
  • Updated 2 months ago
  • (Edited)
Can I Run Two WSJT-X Sessions simultaneously say one on 6meters & other on 20meters 
Running Flex6600M here 
Can not bring up Two WSJT-X sessions up at same time - Any ideas ?
73 Mike
Photo of mikeatthebeach .

mikeatthebeach .

  • 238 Posts
  • 38 Reply Likes

Posted 2 months ago

  • 1
Photo of mikeatthebeach .

mikeatthebeach .

  • 238 Posts
  • 38 Reply Likes
Can not bring up Two WSJT-X sessions up at same time - Any ideas ?
73 Mike
Photo of AH0U

AH0U

  • 250 Posts
  • 29 Reply Likes
It’s very easy.. download Slice Master it’s free and almost automatic...
Photo of Jay / NO5J

Jay / NO5J

  • 1498 Posts
  • 221 Reply Likes
Mike
There are several threads explaining methods for doing that here in the community, here's one way.

https://community.flexradio.com/flexradio/topics/running-2-copies-of-wsjtx-on-a-6600-or-6700 

#FlexRadio IRC chat

   73, Jay - NO5J

Photo of Jay / NO5J

Jay / NO5J

  • 1498 Posts
  • 221 Reply Likes
Mike 

I'd also recommend using Slicemaster, which is how I do multislice digital now, it keeps it simpler. 

https://github.com/K1DBO/slice-master-6000/releases

#FlexRadio IRC chat

   73, Jay - NO5J

Photo of Takeshi Yamada

Takeshi Yamada

  • 170 Posts
  • 48 Reply Likes
I am running 3 wsjt-x's, 30,40,80m simultaneously by creating short cuts of wsjtx.exe, ie. wsjt-xb, wsjt-xc.  Configuration files are created under $HOME/AppData/local/{WSJT-X, WSJT-X - Flex6500-SliceB, WSJT-X - flex6500-sliceC} and works independently.  Also, JTAlert binds to each wsjt-x by clicking three times.   This environment makes me easier to achieve 5BDXCC that I am waiting for another 2 QSL cards for completion.
73 de JI1BNU

Photo of Neal Pollack, N6YFM

Neal Pollack, N6YFM

  • 90 Posts
  • 44 Reply Likes
Hello Takeshi:

I am just on my second day with my new Flex;  Can you tell me; how do you make use of 20, 40, and 80meters at the same time?   In my case, I have a 6600 with two antenna connectors.   My multiband antenna's require a tuner, so with each band change, I need to do a quick tune cycle.    In your case, do you have a close enough match on a 40m and 80m dual-band antenna for one connector, and a tuned 30m antenna on the other connector?

Yes, I know with a two-SCU Flex, I can open 4 panadpters or slices, I was more curious about receiving multiple bands at the same time without  re-tuning on each band.
I would assume it is about properly resonant multiband antenna's  at a good height and
good spacing  [no coupling with rain-gutters, etc], so that tuning is not needed with each band of interest?  [Something that makes me dream about moving to a better QTH :-) ]

Thanks,
Neal
(Edited)
Photo of Takeshi Yamada

Takeshi Yamada

  • 170 Posts
  • 48 Reply Likes
I am using home made 30-40-80m Inverted V(U) at 70' enabling me to watch these 3 bands simultaneously.  The other antenna is HexBean, 10,12,15,17,20m at 72'.   My 6500 has one SCU (4 slices).   I am not sure how they setup tuner/linear/antenna with two SCU's.
73 de JI1BNUKen Yamada
Photo of Michael Walker

Michael Walker, Employee

  • 239 Posts
  • 65 Reply Likes
The correct way to do it is to have a look at the documentation and see about the --rig-name flag.  

I have 2 Shortcuts, and they look like this on the Targe:

C:\WSJT\wsjtx\bin\wsjtx.exe --rig-name=DAX1

and 

C:\WSJT\wsjtx\bin\wsjtx.exe --rig-name=DAX2




How do you get these?

You create them within WSJTx under Configurations, rename DAX1




Now, since you have 2 unique configurations, you can have 1 set to use DAX 1 and the other to use DAX 2, or at least that is the way I do it.

Using SliceMaster now, I can get this.  2 slices using 2 copies of WSJT-x on 6M, 50.313 and 50.323.



Not bad, eh??  

Once 2.3 is released I'll do a video that shows how SliceMaster also contributes.  SliceMaster does require you to have the --rig-name configurations already completed.

Mike va3mw
Photo of Neal Pollack, N6YFM

Neal Pollack, N6YFM

  • 102 Posts
  • 49 Reply Likes
Hi Mike:

Regarding; " SliceMaster does require you to have the --rig-name configurations already completed.",
do you mean that we should manually start WSJT-X.exe with -r=DAX1 and again with -r=DAX2, and during that, do all of the settings configuration for each, and make sure it is working, and only then start slicemaster to let it do whatever it does?

I have not used slicemaster yet, so I am trying to parse your statement above before I start playing.

Neal
Photo of K1DBO

K1DBO

  • 411 Posts
  • 72 Reply Likes
Neal,

With Slice Master, it's not necessary to create the 'rig-name' folder first, but it doesnt hurt either.  When you set the WSJT-X launch options in Slice Master you can choose which of the existing 'rig-name' folders you'd like to use for the instance.  Or... you can select the '<new>' option and create an entirely new 'rig-name' folder. The key here is that what WSJT-X calls '--rig-name', Slice Master calls 'Settings'. 

For WSJT-X and for the other other programs that Slice Master can launch, it's usually a good idea and often necessary to run the program at least once after installing it.  This will finish the installation of the program and give you a chance to enter your station information and other preferences.  But, you dont have to configure the rig or audio device information, Slice Master will do that for you later.  Setting your station information is a good idea because Slice Master will copy your "default" configuration each time it needs to make a new instance specific folder (--rig-name, for WSJT-X).  This way, you wont have to re-enter the information for each slice. 

Good luck!

--Don
Photo of Neal Pollack, N6YFM

Neal Pollack, N6YFM

  • 102 Posts
  • 49 Reply Likes
Do you happen to use JTalert with each WSJT-X instance?   If so, how does JTalert know which instance, or path to a rig config file, to use?  Or does slicemaster also do that?

Thanks,

Neal
Photo of K1DBO

K1DBO

  • 411 Posts
  • 72 Reply Likes
The best way to use JTAlertX with Slice Master is to first launch one instance and configure it.  After it's configured launch as many more as you think you might need, and minimize them.  Then, when Slice Master launches a WSJT-X instance, an unused JTAlertX will pop-up and attach itself to the new WSJT-X instance.  

Aside from having to manually launch and minimize the JTAlertX instances, it all works pretty smoothly.  I'd like Slice Master to manage the JTAlertX instances for you, but that's not going to happen until they fix a couple of minor (but important to Slice Master) bugs.

--Don
Photo of Neal Pollack, N6YFM

Neal Pollack, N6YFM

  • 102 Posts
  • 49 Reply Likes
Thanks, I can deal with JTalert that way, no problem.

73,

Neal