Bug: Sensistivity Temporarely Lost When Receiving Strong Signals

  • 1
  • Problem
  • Updated 2 years ago
Was listening on 40 meters when I came across a very strong signal, i.e. S9+30-40 dB. I was adjusting the filter bandwith to check how AGC would handle this, and ajdusted the BW to 50-100 Hz and then back out to 500-1000 Hz, I noticed that the sensitivity was way down after moving away from the strong signal. Beeing away from the strong signal, adjusting the BW down to 50 or 100 Hz the sensitivity comes back with a slight pop.  This anomaly could be repeated several times.
Photo of Lasse Moell

Lasse Moell

  • 146 Posts
  • 26 Reply Likes

Posted 2 years ago

  • 1
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9199 Posts
  • 3559 Reply Likes
Sounds like you have some DSP noise mitigation enabled.  Like the WNB, maybe?  
Photo of Lasse Moell

Lasse Moell

  • 146 Posts
  • 26 Reply Likes
I have NR enabled.Passing through certain filter BWs I can hear the pop, and sensitivity returns. Is this a "normal" behaviour?