Brand new to 6400m problems finding transmitter settings

  • 1
  • Question
  • Updated 3 months ago
New to Flex 6400m. Attempting to reach transmitter settings by pushing power knob. Transmit menu will not appear when I push and hold it or fast push of knob. Have tried on slice A and B. Does transmit without problems. What am I doing wrong ? Also it came with an older software. Should I upgrade at this point ?
Photo of Pepper

Pepper

  • 1 Post
  • 0 Reply Likes

Posted 3 months ago

  • 1
Photo of Mike KE4U

Mike KE4U

  • 27 Posts
  • 5 Reply Likes

Hi Pepper - There are several transmitter settings areas you can access.

1. Holding down the MIC / SPEED knob or touching the RF PWR information center-screen will bring up a menu.

2. The Transmit tab can be selected by touching the  MENU center-screen.

3. Touching the slice reciever on-screen will let you set transmitted modes and bands.

4. The Phone/CW tab can be selected by touching the  MENU center-screen.


Hope this is useful - I may have missed some other settings but these are ones that come to mind at the moment.


73 - Mike, KE4U

Photo of Wayne

Wayne

  • 614 Posts
  • 84 Reply Likes
I get there by touching the power number on the touch screen it opens the same window then to close it just touch the black area beside it. This way yout mic gain is not changed as it does often when getting to the menu by pressing the power knob.