Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Bonito RadioCom 6 and Flex 6600M

Wolfgang
Wolfgang Member ✭✭
edited November 2018 in SmartSDR API
Hi All
I'm looking for solution how to use my Flex 6600M with the Bonito RadioCom 6 Software.
https://www.bonito.net/hamradio/en/radiocom-6/

Bonito told me, that they must have the API from Flex to delevop the software interface for there software RadioCom 6.

Please get in touch with Mr. Dennis Walter dennis.office@bonito.net from Bonito in order to inform him about the APIs.

Thank you ver much
73, Wolfgang HB9RYZ
www.hb9ryz.ch


Answers

  • DH2ID
    DH2ID Member ✭✭✭
    edited October 2018
    You'll find information here:
    http://wiki.flexradio.com/index.php?title=Main_Page
    and the API: https://www.flexradio.com/downloads-api/

    But why use RadioCom and not fldigi? 

    It's a nice looking program, to be sure, and I tried it with my TS2000X  in my pre-Flex days and I got rid of it as soon as I found out about fldigi, which is almost as good - and free.

    The downside is, that to run Bonito RadioCom6 you need a "switchbox", which is some hardware gizmo controlling your radio and - a dongle! Who else produces software nowadays with a dongle- and a rs232 one at that - as copy protection? 

    73, Alex - DH2ID
  • John G3WGV
    John G3WGV Member ✭✭
    edited November 2018
    The SmartSDR API is what you need and it is described starting here: http://wiki.flexradio.com/index.php?title=Main_Page. I may be a little biassed but I suggest that my API Primer is a good place to start. I also recommend downloading the latest FlexLib library at https://www.flexradio.com/downloads/flexlib_api_v2-4-9-zip which can be mined for examples of how to write to the API.

    73, John, G3WGV

    (Edit: Ahha, beaten to the submit button by Alex!)

  • John G3WGV
    John G3WGV Member ✭✭
    edited November 2018
    It may be worth adding a clarification here.

    The 6xxx radios provide a native low level "Ethernet API", which is described at http://wiki.flexradio.com/index.php?title=Main_Page. Writing to that API requires a fair amount of interface management code and offers total control over all aspects of the radio's operation.

    The "FlexLib API" at https://www.flexradio.com/downloads/flexlib_api_v2-4-9-zip interfaces to the Ethernet API and deals with the low level interface issues. It presents control methods to the application and returns events to notify the application of changes in radio status.

    Whether a developer chooses to program to the Ethernet API directly or via FlexLib is a matter of personal preference. I decided to program to the Ethernet API because I was up for the technical challenge.

    73, John, G3WGV
  • Wolfgang
    Wolfgang Member ✭✭
    edited October 2018
    Hello to All
    Thank you very much for your help and advise. I will try to connect my Flex 6600M over the TS2000 protocol. Maybe this will work.
    73
    Wolfgang

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.