Big little shack computer

  • 1
  • Idea
  • Updated 5 months ago
Running SSDR on a mini Intel NUC kit. Integrates nicely on the desk.  Blog post.  
Photo of Martin Ewing AA6E

Martin Ewing AA6E

  • 291 Posts
  • 57 Reply Likes

Posted 1 year ago

  • 1
Photo of Danny K5CG

Danny K5CG

  • 304 Posts
  • 44 Reply Likes
Pictures! - or it didn't happen. :)
Photo of Martin Ewing AA6E

Martin Ewing AA6E

  • 291 Posts
  • 57 Reply Likes
From the blog post:
Photo of Danny K5CG

Danny K5CG

  • 304 Posts
  • 44 Reply Likes
Thank you!
Photo of WX7Y

WX7Y

  • 546 Posts
  • 98 Reply Likes
I've been running on a NUK5I7 for about 1.5 years with 2 monitors (1 native and the other USB Video Card) and I would not go back to a big desktop, my power bill went way down and the NUK5I7 runs on my stations 13.8Volt supply / Solar Batteries system just great. 

Pictures? don't know what that would do over looking up the Intel NUK on line.

73's
Bret
WX7Y
Photo of Gary - WB5ULK

Gary - WB5ULK

  • 17 Posts
  • 0 Reply Likes
Delbert,

The reviewers may have been correct in "their experience", Windows 7 works with most all NUCs. USB 3.0 had to have a special add-on. Here is a discussion of Windows 7 install and extra driver/installer for USB 3 use:
https://www.washingtonpost.com/opinions/the-carnage-will-continue/2017/10/02/59e51d62-a7ab-11e7-850e...
Photo of WX7Y

WX7Y

  • 546 Posts
  • 98 Reply Likes
The NUC5I7 series does run on WIN7, I think that the NUC7I7 needs to run WIN10 for the USB C/Firbolt to work
IT DOES RUN on my 12V Solar system perfectly
Bret
WX7Y 
Photo of Martin Ewing AA6E

Martin Ewing AA6E

  • 291 Posts
  • 57 Reply Likes
@Gary -  You gave us the wrong link!
Photo of G8ZPX

G8ZPX

  • 196 Posts
  • 110 Reply Likes
Windows 7 will NOT work on any Intel 7th generation CPU. eg i5-7xxx 5th and 6th gen are fine.
(Edited)
Photo of Gary - WB5ULK

Gary - WB5ULK

  • 17 Posts
  • 0 Reply Likes
Yes, Martin, I fat-fingered the copy/paste of the URL. The correct URL is below, and as the post from G7BCX noted, there are limitations (although some *seem* to have over come those. 
https://www.intel.com/content/www/us/en/support/boards-and-kits/intel-nuc-kits/000017241.html

A Google search for this "Intel NUC Windows 7" will result in MANY entries about Win7 and NUCs.
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3471 Reply Likes
We use NUCs for hamfest demo.  They work very well.
Photo of Bob G   W1GLV

Bob G W1GLV

  • 661 Posts
  • 110 Reply Likes
Been using one for about six months and to tell you the truth if the need ever rises I would buy another. Intel has a winner.
Photo of Norm - W7CK

Norm - W7CK

  • 747 Posts
  • 151 Reply Likes
Are any of you using monitors that run off of 12v?    I haven't seen many medium to large displays (27" or >) that run off of 12v DC.

Norm - W7CK
 
Photo of Justin - KL2D

Justin - KL2D

  • 95 Posts
  • 39 Reply Likes
I have a pair of Samsung 4k U28E590D 28” monitors that are running off my station 13.8V supply. They came with laptop style AC to DC power supplies that indicated they were 14.0V output. I bought two extra ones really cheap off of eBay (kept the originals just in case I wanted to sell the monitors) and cut the cables on the monitor side off, added Anderson power pole connectors, and viola! Two less power supplies in the shack. Works great, no issues.

Justin
KL2D
Photo of WX7Y

WX7Y

  • 546 Posts
  • 98 Reply Likes
same here I have ZERO wall warts in my station, 
Radios 
NUC computer
Monitors
Powered USB3 Hub
ASUS Router
Netgear Ethernet switch
Speakers
Ethernet Power Switchs
Antenna switch

Plus all other accessories I have found and searched specifically for 12 to 14 Volt Opertion
ALL runs on my solar power Batteries
73's

Bret
WX7Y
Photo of Danny K5CG

Danny K5CG

  • 304 Posts
  • 44 Reply Likes
I just bought a NUC5i7RYH (Core i7-5557U Gen5 , 8GB RAM, 256GB M.2 SSD). Should be absolutely perfect for the job.

Thanks for the tip!
Photo of Ria - N2RJ

Ria - N2RJ, Elmer

  • 2257 Posts
  • 884 Reply Likes
Bret, were you the person I helped get VPN setup a few months ago? That is honestly the first I've heard of NUCs. 
Photo of WX7Y

WX7Y

  • 546 Posts
  • 98 Reply Likes
Yes it was and Thanks again for your help It works flawlessly.
I have moved the VPN Host server to the Radio's NUC PC and that has been really nice to because I leave it on all the time anyway.
Thanks for your work on the PiVPN
73's
Bret
Photo of Gary Wells

Gary Wells

  • 5 Posts
  • 3 Reply Likes
Using a NUC5i7 here with W10 with my new Flex. Absolutely perfect here as well.

Gary
WB9AYD
(Edited)
Photo of Rich - N5ZC

Rich - N5ZC

  • 173 Posts
  • 19 Reply Likes
How many monitors will the NUC support and what resolution?  I have a couple 29" wide screen monitors that are set at 2560 x 1080.  Will the NUC handle them?  Rich
Photo of Martin Ewing AA6E

Martin Ewing AA6E

  • 291 Posts
  • 57 Reply Likes
NUC (seventh generation) claims to support 3 monitors through 2 I/O ports, HDMI (1 display) and USB-C (2 display streams, Thunderbolt 3).  I use a simple USB-C to HDMI adapter cable to drive my second HDMI monitor. Check Intel specs here. Apparently good for up to 4096 x 2160 pixels each.  Works for me!
(Edited)
Photo of Rich - N5ZC

Rich - N5ZC

  • 173 Posts
  • 19 Reply Likes
Thanks Martin and Gary.
Photo of Gary Wells

Gary Wells

  • 5 Posts
  • 3 Reply Likes
I run with two wide screen monitors that are 25:9 which are like having 4 monitors. 34" diagonal. Works great!

Gary
WB9AYD
Photo of Martin Ewing AA6E

Martin Ewing AA6E

  • 291 Posts
  • 57 Reply Likes
I'd rather have pixels than inches and position the screen closer to the op.  My two 22" monitors already take up too much space on my desk.  (See my photo above.) Different strokes.
(Edited)
Photo of Gary Wells

Gary Wells

  • 5 Posts
  • 3 Reply Likes
Costco has these that I use. Great for multiple stuff going on that I can't fit on a conventional monitor. With my eyes bigger screen is better. As you say, different strokes.

LG 34UM61-P 34" UltraWide Full HD IPS Monitor
Photo of Danny K5CG

Danny K5CG

  • 304 Posts
  • 44 Reply Likes
Gary, I have an LG 29UM67-P. The power jack input says 19V DC. Does your 34UM61-P say the same? Do you run yours with 13.8V? What are the odds my 29" will also work with 13.8V?
Photo of Danny K5CG

Danny K5CG

  • 304 Posts
  • 44 Reply Likes
For future reference the LG 29UM67-P runs fine on 13VDC.
Photo of Rich - N5ZC

Rich - N5ZC

  • 173 Posts
  • 19 Reply Likes
I'm running a NUC I7 and it's driving a Dell 34" monitor.  I've been running this new setup since December and really enjoy it.  I really like having the 34" monitor.  There's plenty of room and I no longer need to monitors, for now anyways, hi hi.

Rich - N5ZC
Photo of WA2SQQ

WA2SQQ

  • 420 Posts
  • 87 Reply Likes
I've been using an i5 NUC running Windows 10 on my 6500 - two monitors. Works flawlessly - best change I ever made. Boot up time with the SSD is ~ 20 seconds.
Photo of Danny K5CG

Danny K5CG

  • 304 Posts
  • 44 Reply Likes
By the way folks. If you need some additional I/O on the NUC, there are replacement lids available with various interfaces. I was thinking I might be a little short on USB ports so I found a lid that added two more.
Photo of Martin Ewing AA6E

Martin Ewing AA6E

  • 291 Posts
  • 57 Reply Likes
This is a nice NUC expansion, but the one that interests me most is the Thunderbolt 3  port provided on the latest i5 and i7 NUCs.  This is a 40 Gb/s port (no typo!) that will support multiple 4K monitors, ethernet, audio, USB3, and what have you.  You can use an inexpensive single adapter cable, or go for a multi-function dock. Search for "Thunderbolt 3 docking". Intel propaganda.
Photo of WX7Y

WX7Y

  • 546 Posts
  • 98 Reply Likes
I have been playing around with the Thunderbolt 3 USB-C port and a I have some issues with a few devices NOT working as windows can't find the supposedly built in drivers. 
The multi-port device I have tried is the PAXCESS USB-C 2 x USB3's, HDMI Port, RJ45 Network, and a USB-C Port.
It won't work on MY NUC7I7 and on my MAC Book Pro running WIN10 under bootcamp it does work most of the time after several retries on 3 of it's USB-C ports but on the 4th USB-C port it acts just like it does on the NUC, just keeps trying over and over to load the drivers. 
There are NO downloadable drivers that I can find on the PAXCESS web site. 

SO just a heads up with the PAXCESS device it probably won't work on your NUC7I7.

73's
Bret
WX7Y
Photo of Martin Ewing AA6E

Martin Ewing AA6E

  • 291 Posts
  • 57 Reply Likes
I've noticed that some tb3 devices claim Windows compatibility and some do not (probably for Macs). Agreed, you need to be careful.
Photo of Rich - N5ZC

Rich - N5ZC

  • 173 Posts
  • 19 Reply Likes
Didn't realize they made lids like this, cool.

I plan on getting a 2nd NUC for operating position #2.

Rich - N5ZC