Behringer CMD Micro - MIDI Controller

  • 1
  • Question
  • Updated 2 years ago
Hi there is the Behringer CMD Micro - MIDI Controller in the SmartSDR for iOS Tools manual the same as the only one I can find which is Behringer CMD Micro DJ Controller. If so are they any good?
Photo of Roy Finch

Roy Finch

  • 19 Posts
  • 2 Reply Likes

Posted 3 years ago

  • 1
Photo of Web Site

Web Site

  • 1 Post
  • 0 Reply Likes
Hi Roy,

yes, that's the same controller and it will work with my App.

In order for it to work, you need the Apple USB 3.0 camera connection kit.

Whether or not it is good, maybe other HAM fellows might want to tell.

73,
Marcus, DL8MRE
Photo of Roy Finch

Roy Finch

  • 19 Posts
  • 2 Reply Likes
Thank you for putting me straight
Photo of Paul Burton

Paul Burton

  • 103 Posts
  • 14 Reply Likes
Roy,

I did a small Behringer CMD Micro Midi application for Windows PC using Flexlib.  I currently don't use any Apple devices so can't comment on that implementation, but I can give a couple of general remarks about use of the CMD Micro for Flex control. 

First, I find the use of the large tuning knobs on the CMD Micro to be a problem, as if you try to spin the knobs too fast it will overload the system with interrupts and the tuning will be jerky or stop.  I much prefer the Flex Control for frequency tuning as it works directly with the radio and is very smooth.  Perhaps my  implentation needs more work to make the tuning better.

Specific implementations using the CMD Micro  will satisfy certain users but others may wish a different assignment of knobs/buttons/sliders to the Flex controls.  A CW op would prefer a different setup to a SSB op.  It would be impossible to satisfy everyone with the limited number of controls. 

I find that there are not enough knobs/buttons/sliders on the CMD Micro to work well with more than one panafall and two slices.  Those with more capable radios may wish for more controls, so a more sophisticated MIDI controller would be appropriate.  I just have a 6300 so it's no problem.

Beyond that, I find the CMD Micro to work well for my purposes, and use it whenever I'm on the air.  I hope these comments help, but it is just my perspective.

Paul
Photo of Marcus - DL8MRE

Marcus - DL8MRE

  • 151 Posts
  • 40 Reply Likes
Hi Ken,

the only one I can recommend is indeed the one from Apple. I have tested a few others (inexpensive and expensive) and all of them had issues.

The main problem here is, that you need an adapter that either provides USB AND the option to power the USB device.

Even though the Behringer CMD Micro has batteries and the manual states that the reason for the Batteries is to power the Behringer CMD Micro it turns out that this is not true. The Behringer CMD Micro still needs power over USB.

73,
Marcus
Photo of Paul Staupe

Paul Staupe

  • 18 Posts
  • 1 Reply Like
Marcus,

As the Behringer CMD Micro-Midi controller is no longer available, I purchased an Apple I-Pad to Lightning adapter and the current version Behringer Studio 2A from Amazon.  Unfortunately, although the Studio 2A lights up when directly attached to the PC, it does not when attached to the Lightning adapter, so I'm assuming it won't work.  Can you point us to another alternative controller?

73,

Paul W0AD
Photo of Ted  VE3TRQ

Ted VE3TRQ

  • 592 Posts
  • 208 Reply Likes
How about trying a powered USB hub between the iPad and the midi device? The iPad does not provide much power, and USB devices will negotiate that. If you have one on hand, it won't cost anything to try.

73 Ted VE3TRQ
Photo of Ken - NM9P

Ken - NM9P

  • 4239 Posts
  • 1352 Reply Likes
The adapter I have has a short cord with lightning connector that attaches to the iPad, and then there are two ports on the other end - one for the USB cable, the other for the charger cord.

When using the lightning adapter, it is necessary to also plug in the charger cord to the other port in the adapter in order to provide enough current to power the MIDI device.
Photo of Paul Staupe

Paul Staupe

  • 18 Posts
  • 1 Reply Like
Thanks Ted, Ken, 

I've got the same lightning adapter that Ken has.  When I installed it yesterday, it updated its configuration for about 5 minutes.  Plugged it in to the charger, the iPad and then the Behringer 2A,  The controller briefly lit, but then went dark.

Today,   I followed Ted's advice and purchased a powered USB 2.0  hub (or should I have bought a USB 3.0 hub?)  so I'll test it this evening.   It would be helpful if Marcus checked out current MIDI models and made recommendations, there are no more CMD-Micro controllers available any more. 

73,  Paul W0AD
Photo of Roy Finch

Roy Finch

  • 19 Posts
  • 2 Reply Likes
ThanksPaul great help
Photo of Roy Finch

Roy Finch

  • 19 Posts
  • 2 Reply Likes
Can someone confirm the apple camera kit is the Apple Lightning to USB 3 Camera Adapter In the Apple Store.
Photo of Roy Finch

Roy Finch

  • 19 Posts
  • 2 Reply Likes
Hi just tried to order the Behringer CMD Micro DJ Controller and got this back, 

I am writing in reference to the above order as the following item has been discontinued, therefore we are unable to fulfil the balance of you order and are unable to offer an alternative on this occasion.

is there an alternative that can be used?

Thanks

Roy
Photo of MH_Flexer

MH_Flexer

  • 65 Posts
  • 13 Reply Likes
I have a new unit, never used. I don't have the original packaging but the unit is new.
Photo of Roy Finch

Roy Finch

  • 19 Posts
  • 2 Reply Likes
Are you US or U.K. Based. I am in the U.K?
Photo of MH_Flexer

MH_Flexer

  • 65 Posts
  • 13 Reply Likes
I have a new unit, never used. I don't have the original packaging but the unit is new.
Photo of MH_Flexer

MH_Flexer

  • 65 Posts
  • 13 Reply Likes
I am USA based, shipping costs are quite high between us
Photo of Roy Finch

Roy Finch

  • 19 Posts
  • 2 Reply Likes
Yes, thank you for the offer but I think I have just found one over here.