Bar slider on control sides?

  • 1
  • Question
  • Updated 12 months ago
Is there supposed to be a slider on the right side of the control panels? Talking to a friend that has it,,were is mine?
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 2496 Posts
  • 563 Reply Likes

Posted 12 months ago

  • 1
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1086 Posts
  • 220 Reply Likes
Hi Bill

Good to talk to you on 7.192 the other day.

The bar slider will only show up if you have all of the TX panel applets enabled. See picture

On my pair of 1080P monitors with standard scaling in Windows 10 The bottom of the last panel is partially cut off. The bar is to the right of the panels so you can slide the panels down to get to the controls.

Dave wo2x
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 2496 Posts
  • 563 Reply Likes
Thanks, Dave, we are on 192
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1086 Posts
  • 220 Reply Likes
I'll get on remote. See you in a few.

Dave wo2x
Photo of Rich McCabe

Rich McCabe

  • 976 Posts
  • 212 Reply Likes
Dave if you are running yours on a display with 1200px or larger vertical resolution and you have SmartSDR maximized the slider will not show even with all 5 panels. Those running 1080 or lower vertical resolution will have to scroll to see all of the 5th panel.

Its all about resolution.
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1086 Posts
  • 220 Reply Likes

Thanks for the tip Rich.

I've got a pair of 24" gaming monitors (1 ms refresh @ 180 Hz) so stuck with 1080P. Had considered going to a larger UHD TV as a single monitor but then you have to play with the fonts and scaling to get stuff to look right. Some of the guys at work did that and it's not bad but they are about 6 ft back from 40" TV/monitor. I opted for 4 Dell edgeless displays in a square for work.

Dave wo2x