Band Plans

  • 13
  • Idea
  • Updated 4 years ago
  • Planned
just like we had in PowerSDR, would be nice; all the sub-bands + all the SW & MWBC bands + all the WWV & CHU freqs.
Photo of W5XZ - dan

W5XZ - dan

  • 571 Posts
  • 86 Reply Likes
  • hopeful

Posted 6 years ago

  • 13
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9188 Posts
  • 3550 Reply Likes
Band plans? We don't need no stinkin' band plans. :-)

We have some really cool visual band plan indicators planned for SmartSDR such as coloring for sub-bands and license class.
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9188 Posts
  • 3550 Reply Likes
Hear hear!!!!
Photo of Walt - KZ1F

Walt - KZ1F

  • 3040 Posts
  • 645 Reply Likes
@Howard, I am not convinced that statement, NC saved AR, is entirely accurate. I acknowledge it was a fear though. I do, however, agree it brought in a lot of competent people. I also maintain it brought in a lot of less than competent people as Ernest attests to. I, too, was a VE, but that was before no code. If there were nocode in the 60's I would have been licensed around '65. However code, even 5wpm, was just a barrier one had to cross before they were allowed on, just like, oh, being able to park a car before getting a license, land an aircraft before getting that license, fly without any ground references before getting an instrument rating. Memorizing the answer sheet is only a little bit different that filling out an FCC form for a CB license. I guess they don't have them any longer either. With the extreme budget cuts, who is going to monitor novices don't work the extra band segments, or advanced, or even general? I recall, as a teen, there were folks with 10m amps running them on 11m, fine, illegal but at least they were not in the 10m band...most of them.
Photo of Steve W6SDM

Steve W6SDM

  • 625 Posts
  • 283 Reply Likes
I am with Howard on the elimination of the code requirement saving ham radio.  I spent ten years as a "professional" CW operator and code instructor in the military. I have been using CW since before I could drive a car.  There wasn't much of a learning curve for me, but there is a tremendous learning curve for the typical person.  Many equate it to learning a second language.

The original reason for having Morse code as a requirement, as it was with electrical theory, was to create a pool of qualified radio operators for any need that may arise in either emergency or military communications.  While I love Morse, the fact is that technology has made it obsolete as a practical communications media.  It is, however, very much a viable communications media for contesting and DX communications, and a good standby "all else fails" method for disaster. 

Making CW a requirement at the cost of excluding many potential licensees doesn't make sense.  Using the requirement to keep out the "unworthy" doesn't make sense either because I know of many 35 WPM lids.
Photo of Ken - NM9P

Ken - NM9P

  • 4239 Posts
  • 1351 Reply Likes
I earned the 5, 13 & 20 WPM the hard way beginning in 1974. The 13 was in front of the FCC examiner with old military headphones. But I had no issue with elimination of the code requirement. The ability to learn an auditory alphabet has no bearing upon other operating ability.

Though some thought it served as a filter against poor operating skills and low IQ individuals, my experience has been that no FCC test, other than an actual supervised operations test, can enforce good operating practices.

Frankly, some of the rudest, crudest, most unfriendly ops I have encountered on the air had 1x2 calls.

The best ops, then and now, we're TRAINED by Elmers and clubs who cared enough to teach proper procedures. one of the ha rags had an article called "losing your Novice accent." My Elmer, kept in contact with me on the landline while I made my first several contacts, and continued to teach me how to be a good ham for several years after that.

Every time the hobby changes, there are those who claim, "if they didn't do it the way I had to do it, they aren't REAL hams." This has been true of the spark-CW transition, the CW - AM, the AM-SSB, and transitions to ESSB, digi modes, FM & repeaters, tubes to transistors, transistors to IC's, legacy to SDR, home brew to factory built rigs, and many more transitions.

Let's all just agree... The hobby is constantly changing, and those who embrace the changes and progress will have fun. Those who refuse to will become old curmudgeons.

Let's have fun!

Ken - NM9P
Photo of Ernest - W4EG

Ernest - W4EG

  • 215 Posts
  • 39 Reply Likes
No worth my comment Ken....

Perhaps this will also be deleted too.  

And I have not said anything!

Question? Am I the only sensor on this forum???????