Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Band change from tab panel in SSDR 1.5 stops working

Steve Walker
Steve Walker Member
edited March 2017 in SmartSDR for Windows
Upgraded to 1.5 SSDR with no errors or issues reported during the process.

I have noticed today that the band TAB buttons don't change the band. If you're on 40m LSB and click 20m then you loose the SLICE RX but the radio does not move. You need to double click the fft window to return to where you were operating.

No band buttons work after changing the band to the "dead space". The active SLICE stays on where you were in the tool-bar.

Memories work fine - you can jump about without any issues.

I have not reset nor cleared any settings or profiles.

Comments

  • Bill
    Bill Member ✭✭
    edited December 2016
    That's odd as mine works fine and I have not done anything other than install SSDR 1.5
    Bill
  • DH2ID
    DH2ID Member ✭✭✭
    edited March 2017
    A reset often works wonders...
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    Yes, it sounds like you have an issue in the band persistence database that needs to be cleared using a factory reset.
  • Steve Walker
    Steve Walker Member
    edited September 2016
    Correct, nothing software wise helped - a power-on "purple light" reset cured it.

    Might be worth noting?

    Cheers Steve

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.