Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Auto Bandswitching Module for ICOM IC-2KL, IC-4kl and PW1 Amplifiers

2»

Answers

  • Burt Fisher
    Burt Fisher Member ✭✭
    edited August 2018
    I have a 2KL with the 10 meter option installed so whats the story now?
  • Ed Johnson
    Ed Johnson Member ✭✭
    edited August 2018
    Burt,
    What is your amateur call?  The same applies to the 2kl as the 4kl except the connector to interface with is a cinch jones type connector instead of a din connector if I remember correctly.  You need 8v, the band voltage for 10 meters and ground going to that accessory connector.
    Ed W2PH
  • Ed Johnson
    Ed Johnson Member ✭✭
    edited August 2018
    You also need 13vdc to enable the amplifier to turn on to the same accessory connector
  • Burt Fisher
    Burt Fisher Member ✭✭
    edited August 2018
    K1OIK, so I need 8v, band voltage and 13v correct?
  • Ed Johnson
    Ed Johnson Member ✭✭
    edited August 2018
    Yes, that should get you on 10 meters

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.