Audio Level with DAX and Xmit keying

  • 1
  • Question
  • Updated 6 years ago
  • Answered
PSK with DAX. I'm using MULTIPSK with DAX. I followed the YouTube and have a couple of questions. I have to run the DAX receive gain full scale to get a receive level of about 50% on the MULTIPSK signal indicator. Anything less than full scale drops the level in MULTIPSK to below 20%. This works but I am concerned about having to run the gain so high. Has anyone else seen this behavior in other PSK S/W?

Also, in the video going into the transmit mode on the PSK S/W seamed to put the radio in TX mode. For me to transmit I have to put the 6500 into transmit mode with the MOX button and then hit transmit on PSK S/W. Did I miss a setting somewhere?

Tnx, Nick
Photo of Nick


  • 48 Posts
  • 2 Reply Likes

Posted 6 years ago

  • 1
Photo of Robert -- N5IKD

Robert -- N5IKD, Elmer

  • 488 Posts
  • 152 Reply Likes
You probably need to set up the MULTIPSK program to trigger the PTT via serial port provided by SmartCAT.