ATU or TUNE not working in SSB modes 6300

  • 1
  • Problem
  • Updated 4 years ago
  • Solved
When clicking ATU in SSB modes on all bands there is no output on the panadapter or the power indicators and the tuning fails. All other modes will tune up correctly. Selecting the TUNE button in SSB modes does not produce any output. ReBooted radio and computer. Was working okay.

Ver 1.2.1.49
Photo of Bill W2PKY

Bill W2PKY

  • 461 Posts
  • 79 Reply Likes

Posted 4 years ago

  • 1
Photo of Al K0VM

Al K0VM, Elmer

  • 583 Posts
  • 95 Reply Likes
Official Response
Bill,
  One set of conditions that can cause that is if  your SSB TX bandwidth does not include the CW PITCH frequency...  i.e. a SSB low TX cut frequency of 500 hz and a CW Pitch frequency of 400hz.

I dont know what you have there but maybe its something else.

AL, K0VM