Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Anyone knows how is air circulation Flex signature 6300?

YV5WZ
YV5WZ Member ✭✭
edited February 2020 in FLEX-6000 Signature Series
I'm going to place two 4 inches fan to refresh area where my Flex 6300 is, I'm wondering if right move is blowing or extracting air. As flex right side is open, I will work on left side which towards to wall.

All this is my "sweet wait" for Flex 6600

thanks for your advises and recommendations

George, YV5WZ / PY3ZZZ 

Answers

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2019
    Air enters from the front and is exhausted via the rear.
  • Keith Flint
    Keith Flint Member ✭✭
    edited February 2020
    I use a laptop cooler here. They have two quiet fans in them and cool from below, even without vent holes, plug into a powered USB port
  • DaveC
    DaveC Member ✭✭
    edited June 2017
    Tim,
    Is it better to push air through the front or pull air from the back?
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited June 2017
    Don't go against the flow.  It is easier to push from the front.

    However, Keith's idea is very valid.  A laptop cooler usually work well unless the ambient temperature is really high (+85F)
  • YV5WZ
    YV5WZ Member ✭✭
    edited June 2017
    Roger That!!.....Thank you! Tim...you're "The Man"

    George, YV5WZ / PY3ZZZ
  • YV5WZ
    YV5WZ Member ✭✭
    edited June 2017
    I have one ...!!!  just one fan, but.....guess its gonna work

    Thanks

    George
  • Ken Davis
    Ken Davis Member ✭✭
    edited June 2017
    Pulling air from the radio would aid in dropping the internal pressure which would drop the air temperature and increase air velocity.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.