Anyone buy a Flex 6300 from the Flex Trade in Program? Good deal?

  • 2
  • Question
  • Updated 1 year ago
I am going to buy a 6300 and I was wondering if anyone could share their experience about purchasing a used certified 6300 directly from Flex. They take $200 the price of a new one, but is the shorter warranty period worth that in your opinion?
Photo of Robert Scott

Robert Scott

  • 2 Posts
  • 0 Reply Likes

Posted 2 years ago

  • 2
Photo of Steve W6SDM

Steve W6SDM

  • 622 Posts
  • 280 Reply Likes
I don't think you'll use much of the warranty on the 6300 - I didn't.  On previous Flex radios, I found their out of warranty service to be great.  It was reasonably price and the turnaround was fantastic.    So, if you're looking to save a couple Franklins, I think there's very little risk in a used 6300.
Photo of Michael Coslo

Michael Coslo

  • 812 Posts
  • 195 Reply Likes
Yes. The radio is an exceptionally fine bit of kit, and almost problem free. You very seldom hear about issues. Any issues you are likely to have would be apparent quickly, but the previous owner did all the burn-in for you 8^)

I would personally suggest using a Windows 7 computer with it until Microsoft get's their act together with Windows 10. Having used both, my Windows 10 computer ended up being a problem, while I have had no problems at all with my W7 install and the Flex. 

Go for it!
Photo of mikeatthebeach .

mikeatthebeach .

  • 247 Posts
  • 38 Reply Likes
Traded my 6500 in on their program for a new 6700 
Worked out great !
(Edited)
Photo of Andrew Holman

Andrew Holman

  • 67 Posts
  • 12 Reply Likes
I bought one before the program was official last year and still have the radio. Works great.
Photo of Mark WS7M

Mark WS7M

  • 386 Posts
  • 113 Reply Likes
I just bought one.  The unit looks brand new.  As far as the warranty goes I look at it this way:

If you are careful with your radio then it will last a life time excepting component failures which are much more likely in the first heavy period of use.

Anyway my experience also has been that FRS is very reasonable on repairs.

I don't know how to quantify what you are asking except that in my case the $200 made it work for me.

Mark - WS7M
Photo of Jim Gilliam

Jim Gilliam

  • 839 Posts
  • 172 Reply Likes

I've had a 3000, 5000, and 6500 remoting, keep them on 24/7 never had a problem other than my lack of ability to read.


Jim, K6QE

Photo of Delbert McCord

Delbert McCord

  • 108 Posts
  • 19 Reply Likes
I purchased my first 6300 at Dayton a little over a year ago, I liked it after the learning curve. When they came out with the Trade in program I purchased a used one of their trade in for my cabin. (I had a IC-756 Pro III at the cabin) but after getting used to the Flex I just wanted one for the cabin also.

To tell you the truth I could not tell one from the other, it was perfect, just like the new one. Its been many months now and I am still happy with it.  I have been blessed that I have never had to return either one of the Flex rigs I have. I do know of a bad experience a friend had with a Flex 3000. They kept sending it to him with the same problem it had when he returned it to them. It never was fixed. To say the least he is not happy. He knows its not the computer because he has 2 Flex 3000.s and he can unplug the working rig and plug in the bad one and all the problems start up. He DID NOT BUY IT FROM FLEX he purchased it used off eBay. He has decided to keep it for spare parts, he does not want to stick someone else with it by selling it to them.

I love my Flex, and no one can be perfect all the time and normally Flex has a great reputation as far as customer service. I would not have any reservations buying a used rig from Flex, I would not however buy one from a private person unless I know them, I would not buy one off eBay.  
Photo of Bill

Bill

  • 2 Posts
  • 1 Reply Like
I bought my 6300 from the trade-in program. I had several issues neither of which were related to the radio itself or function.  It took about 3 weeks to get my radio.  To be fair, the radios really are not in great supply.  They had my radio at the time I ordered it.  I was told that they were going through it to make it factory fresh.  I also ordered the ATU on the advice of several friends, also Flex owners.

I waited several weeks for them to send the radio.  When I received it it was as advertised.  I did not find the ATU in the package and figured that they must have installed it while they were making it "factory fresh".  That assumption was wrong.  I recontacted them advising that the radio did not have the ATU installed or included with their shipping package.  They apologized for the oversight and over-nighted the ATU to me.  They did not feel bad enough about it to include a hat as suggested....

Love the radio.  It does more tricks than I possibly will ever use, part of the reason for getting the 6300 and not the 6500 or 6700.  I seldom use my other HF radios any more....
Photo of Bill Roberts

Bill Roberts

  • 217 Posts
  • 39 Reply Likes
I bought a slightly used 6300. It looked like New. It smelled new. It had all the packaging. It has made one trip back to Austin at Flex expense. I think buying recertified it a great way to get a great radio and save $200!
Photo of Walt - KZ1F

Walt - KZ1F

  • 3040 Posts
  • 643 Reply Likes
My 2¢? For $200 buy new, get a full warranty. Two hundred dollars is almost the price of a new one.
Photo of Matt - KD5FGE

Matt - KD5FGE, Employee

  • 75 Posts
  • 33 Reply Likes
Hi Robert! Thanks for your interest in the Pre-Owned FLEX-6300. We are offering a full warranty on the units. Feel free to contact me if you have any questions!

sales@flexradio.com
512-535-4713 x 1
Photo of Larry Williamson

Larry Williamson

  • 96 Posts
  • 10 Reply Likes

Matt,

What does a--- Pre-Owned FLEX-6300 typically cost?

Thanks

Larry


Photo of Matt - KD5FGE

Matt - KD5FGE, Employee

  • 75 Posts
  • 33 Reply Likes
Larry, We actually now have them posted on our online store. They can be found at the following link:
http://cart.flexradio.com/Certified-Pre-Owned_c_44.html
Photo of Larry Williamson

Larry Williamson

  • 96 Posts
  • 10 Reply Likes

Great--- Thanks, I looked but never quite got to the right page!

Larry



Photo of Ross - K9COX

Ross - K9COX

  • 335 Posts
  • 101 Reply Likes
Make sure you get one with low transmitting hours, they tend to get gassy with low emissions and may need gettering. Put it on a variac and bring it up slowly.
(Edited)
Photo of Winston VK7WH

Winston VK7WH

  • 247 Posts
  • 42 Reply Likes
Ha ha
Photo of Winston VK7WH

Winston VK7WH

  • 247 Posts
  • 42 Reply Likes
Some of us oldies do remember. I was QRT for 38 years and made sure that I followed the procedure you outlined when I fired up the old rig. It worked like a charm. Next step is to fire up my 1960s home brew linear! With 4 x 6KD6s that will be a challenge!
Photo of Ken Hansen

Ken Hansen

  • 252 Posts
  • 67 Reply Likes
Sorry for updating an older thread, but I just wanted to point out I bought a 'Certified' 6300 a couple months ago and the radio was like-new, $200 cheaper than new, and included the full two year warranty, as noted in the item description.
Photo of N5LB - Lionel B

N5LB - Lionel B

  • 131 Posts
  • 23 Reply Likes
Trade In (5000A to 6300)  worked out great for me.  The service during the sale was excellent.  I don't believe that I could tell the difference from a new one.  Also, I wanted to be able to trust the seller to deliver as promised. Direct to Flex versus an unknown individual made sense to me. No worries about a damaged rig or the seller failing to do as promised.   

Selling these days (the 5000A) has become too risky, too much scammer risk over very little difference between trade in value and market value.  In this aspect trust in FlexRadio was a key factor. 

The 6300 has worked flawlessly for me 
Photo of David NT8Y

David NT8Y

  • 19 Posts
  • 3 Reply Likes
I went the trade in route with one of my Icoms. I was ordering a new 6500. The price for the trade in was acceptable to me and I was waiting on a new 6500. There was a delay on it and Matt Youngblood kept in contact with me. He called me as I was waiting for the new 6500 and offered a certified preowned 6500 with full warranty and explained there where a few scratches on the back panel. The price was worked out and I decided to go with it. It arrived without issue and the scratches are minor. I am very pleased with the radio at this time. I am glad Matt took the extra effort to work with me on this purchase,

.

David KE8DVM
(Edited)