Any insite into v2.0 internet functionality?

  • 1
  • Question
  • Updated 2 years ago
  • Answered
Anyone havr info as to how the connectivity differs from those of is using static ip/ dyndns and softether? I get that the vpn will no longer be needed. But, is it safe to say we still need static public ip or dyndns? The reason i ask, is ive thought of relocationg my station to a remote location and using a cellular hotspot that is showing speeds of 40mb/25mb and pings of 26 ot less. I have unlimited data plan. But, after speaking to AT&T, it looks like they NAT device ip's on a VLAN. So, im not sure it will work. Anyone ever try that? Also any input on v2.0 functionality is greatly appreciated. Will it use UDP ports, etc.?
Photo of WV9L

WV9L

  • 102 Posts
  • 16 Reply Likes

Posted 2 years ago

  • 1
Photo of Ria - N2RJ

Ria - N2RJ, Elmer

  • 2314 Posts
  • 956 Reply Likes
Official Response
No static IP is needed. SmartSDR will connect to the SmartLink service (in the cloud) and then broker the connection. After that it's just client to radio and the cloud service is out of the picture. No ports to forward, everything will be fully automatic. You can override this if you wish.
You can use either an account at flex or a social login like google or Facebook. The advantage of the latter is that it will allow 2 factor auth for additional security.

I can't comment more, sorry. However we are testing a variety of network connection types. Some will probably not work due to heavy restrictions (blocked ports etc) but it will be easier than VPN setup.

Of course if you still want to do vpn it will still work.

Ria
(Edited)
Photo of WV9L

WV9L

  • 102 Posts
  • 16 Reply Likes
Thanks Ria
Photo of Mack McCormick

Mack McCormick, Elmer

  • 493 Posts
  • 173 Reply Likes
It will work using AT&T iPhone or Hotspot

Mack
W4AX
Photo of WV9L

WV9L

  • 102 Posts
  • 16 Reply Likes
Mack,

I am meaning using the hotspot at the radio/server end. I have a hotspot in my unlimited plan. But it looks like its getting NAT'd an internal ip from AT&T. I couldnt ever get connected from cell data on my phone, back to the radio itself. I also couldnt connect to my home security cams. By it being NAT'd behind AT&T's network switch, i have no control of port forwatding, etc. So, even when i put my dyndns address or the dynamic ip (i found by running "whats my ip", behind the hotspot) in the fixed info in the ios app on my devices, it failed to see the radio.

Running a trace route from behind the hotspot, i see NAT'd LAN from AT&T. Bummer :-(

I was hoping to dump my dsl provider and use my unlimited hotspot as my home internet source. Also, maybe moving the station to a remote location on our family farm, if it would have worked.
Photo of WV9L

WV9L

  • 102 Posts
  • 16 Reply Likes
Photo of Mike va3mw

Mike va3mw

  • 824 Posts
  • 199 Reply Likes
What Ria said.  :)

de va3mw
Photo of Jim Gilliam

Jim Gilliam

  • 939 Posts
  • 218 Reply Likes

Using my iPhone, Verizon LTE, have perfect QSO's using Apple L2TP, with Softhether on the server end with a computer. Fortunately, I have an unlimited band plan so I enjoy my Flex wherever there is Verizon (or WiFi), which is just about everywhere in So. Cal. The latency is negligible. As an aside, Apple does not support TAP OpenVPN  so OpenVPN app is worthless for Flex work.


Jim, K6QE

Photo of WV9L

WV9L

  • 102 Posts
  • 16 Reply Likes
No, they are putting a public ip at a regional switch it looks like, then assigning a LAN address at each of the sites, then running a VLAN on the devices on that site. The ip im getting is a lan ip. So from the outside it has no way to know the routing to get back to devices behind my mifi. Essentially there ends up being 3 LANs to hop thru back to the public ip, thats shared with who knows how many people. Guess im stuck with my over priced and crappy cable ISP. Id like to relocate my station to a rural spot i have, but there is no internet but cellular, so thats why i was researching this.
Photo of KY6LA - Howard

KY6LA - Howard, Elmer

  • 3763 Posts
  • 1621 Reply Likes
Take a look at LOGMEIN HAMACHI. it will span NAT

https://www.vpn.net/
Photo of Ria - N2RJ

Ria - N2RJ, Elmer

  • 2314 Posts
  • 956 Reply Likes
It's called carrier grade NAT and is a valid question. I've not tested this use case (cell only at the remote end). I don't know if anyone else has.

Ria
Photo of Mike va3mw

Mike va3mw

  • 824 Posts
  • 199 Reply Likes
While I haven't tested it with Flex, I did test a Softether VPNAzure tunnel and it did work.   

Mike va3mw
Photo of Ria - N2RJ

Ria - N2RJ, Elmer

  • 2314 Posts
  • 956 Reply Likes
There was one case of a guy in Québéc I was trying to set up a vpn with and it didn't work. I think his isp was blocking even vpn azure.

This conversation is no longer open for comments or replies.