Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Any chance that SSDR will have 25K steps for those that have transverters for the 70cm repeater freq

Roy Laufer
Roy Laufer Member ✭✭
edited June 2020 in New Ideas
Well, the title says it all!

Any chance that SSDR might be capable of being set for 25K steps for the 70 cm repeater bands (as well as 15K steps for 2 meter repeater bands)?

It would just be very convenient...

73,
Roy, AC2GS

Comments

  • Keith Ferguson
    edited August 2015
    12.5 KHz would be nice as a selectable option for Europe - the existing 2.5 KHz step is a workable compromise, but not as nice to use as the correct steps.
  • DrTeeth
    DrTeeth Member ✭✭
    edited June 2020
    It is possible to type figures within the frequency change number box and have those new steps work. They may or may not survive a reboot. I have not checked to see what the limitations of this are, I just found that it does work whilst doing some experimenting
  • Keith Ferguson
    edited March 2017
    Nicely spotted Guy! Just have to remember to input 12.5KHz as 12500 - the box doesn't seem to accept decimal inputs.

  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited December 2016
    Yes.  That should work nicely.  I manually enter the numbers in order to get 250 Hz steps when playing with Remote on my iPad.  Makes it very nice.

    Ken - NM9P
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    Yes, the value is in Hz.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.