Antenna matrix and band confusions with V1.2.1

  • 1
  • Problem
  • Updated 5 years ago

While scanning across VLF LF and HF the band settings change when crossing various frequencies.  It appears the settings for another band is applied.

This happens at 35.8 KHz, 237.8, 372., 1.700, 2.100, 3.400 and 4.100Khz.  Ant1 switches to RXa and back again at the next boundary.

Also (6700) RX Gain at +30 drops back to around the +10 level

Also another question:  SAM on the BCB signals introduces distortion into the audio.  AM mode is clear.

Photo of Stan - VA7NF

Stan - VA7NF

  • 422 Posts
  • 97 Reply Likes

Posted 5 years ago

  • 1

Be the first to post a reply!