Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

antenna selection problems

Tim K8XS
Tim K8XS Member
edited September 2015 in FLEX-6000 Signature Series
I have a 6700. Just received it back after product enhancement. I'll start with the simple case for now. I have a single panadaptor displayed with a single slice receiver. I am using 40 meters (actual band does not really matter). I have ant 1 selected for both receive and transmit. Life is good and everythiong works as expected. I now want to change the receive antenna to another antenna that is connected to ant2, keeping transmit on ant1. As soon as I select ant2, all signals go away. If I then select the transmit ant as ant2, the signals come back. In summary, if I have different antennas selected for receive and transmit, I hear no signals. If I have receive ant equal to transmit antenna, all is fine.

It gets even stranger if I have more than one panadaptor displayed.

So what is going on?

Thanks,
Tim K8XS

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.