ANT1 ANT2 on different panadapters getting confused

  • 1
  • Problem
  • Updated 2 years ago
  • Solved
Ok, I'm starting to get frustrated.  I have a 6700 and two antennas.  I set the first panadapter to ANT2 for both TX and RX with LOOP-B highlighted and I have a loop bnc cable in place.  I establish a 2nd or 3rd panadpater with ANT1 for both TX and RX.  As I switch bands on the 2nd and 3rd panadapters, I'm CONSTANTLY having to go  back and FIX the ANT 2 selecttion on panadapter 1.  I reported this problem 2 years ago and unless I'm missing something, it still hasn't been addressed. 

Sorry for the rant, but I seem to be spending a lot of time screwing around with workarounds....
Photo of Norm - W7CK

Norm - W7CK

  • 747 Posts
  • 152 Reply Likes

Posted 2 years ago

  • 1
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3479 Reply Likes
Official Response
Sounds like band level persistence is changing antenna selection settings.  You may need to clear band persistence by doing an export of your profiles but do not select the Preferences option.  Do a factory reset of the radio.  Then import in your profiles.  This will clear your band level persistence.