Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR, Power Genius, Tuner Genius and Antenna Genius Software?

SmartSDR v3.7.4 and the SmartSDR v3.7.4 Release Notes | SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
SmartSDR v1.12.1 and the SmartSDR v1.12.1 Release Notes
Power Genius XL Utility v3.8.8 and the Power Genius XL Release Notes v3.8.8
Tuner Genius XL Utility v1.2.11 and the Tuner Genius XL Release Notes v1.2.11
Antenna Genius Utility v4.1.8
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

AM Power

Options
Robert -- N5IKD
Robert -- N5IKD Member ✭✭
edited June 2020 in SmartSDR for Windows
I noticed that the specification for AM is 30W, but when I set the modulation to AM the scale still goes from 0 to 100, So when I move the slider to 30, am I transmitting at 30W or at 30% of 30W?

Answers

  • Eric-KE5DTO
    Eric-KE5DTO Administrator, FlexRadio Employee admin
    edited February 2017
    Options
    The AM carrier with no modulation will be somewhere around 35% of the selected power. You should be able to see the full selected power output with modulation.
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
    Options
    So should I have the Power control at 100 or set it for something lower? Does the 6500 automatically reduce "carrier drive" to match without human intervention? I got a report of some "downward modulation" from a station on 40 meters yesterday until I reduced the power setting to about 68. No guarantee that this was scientifically accurate, The audio reports, by the way, were outstanding. I haven't run AM for a couple of decades, almost, but I thought it would be fun to test it out!
  • Eric-KE5DTO
    Eric-KE5DTO Administrator, FlexRadio Employee admin
    edited February 2017
    Options
    The SmartSDR software in the radio handles AM mode properly and will keep the carrier in proportion to the selected RF Power setting. No need to adjust for AM.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories