AGC changes on wrong panadapter

  • 1
  • Question
  • Updated 6 years ago
When working the salmon run today I opened a second and third panadapter but not additional slice receivers. On 10M I changed the preamp to +20. But the audio I heard from the slice on 20M increased in gain as well. It looks like changing the gain on one panadapter changes them all???

73
Greg
Photo of Greg

Greg

  • 656 Posts
  • 63 Reply Likes

Posted 6 years ago

  • 1
Photo of Al K0VM

Al K0VM, Elmer

  • 610 Posts
  • 102 Reply Likes
Greg,
WIth the 6500 you have but one SCU ( signal capture unit i.e. ADC ) that ALL panadapter and RX slices use. The Preamp is the antenna path before the SCU, therefore any change in PREAMP setting ( not AGC ) will effect all slices and panadpaters.

( the AGC-T contrrol is located on each RX slice control panel and only effects that slice.)

If you have the 6700 that has two SCU then you have two preamps..

AL, K0VM