Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

A Mddest Proposal - Part Deux

Roy Laufer
Roy Laufer Member ✭✭
edited May 2017 in New Ideas
My previous "Modest Proposal" was for the SSDR quit remotely feature that I now regularly use!

Let's see if I can go "2 out of 2"...

I have turned my favorite rig, my 6700 into an "all-in-one" transceiver with the judicious addition of a 2 M LDPA and a high end band tuned 70cm transverter, and use them on local repeaters frequently.

One of my problems is that a Repeater's "subaudible" PL tone is incredibly audible to me.

Yes, I have used the equalizer to lessen the hum in the background, but never to fully remove it. It would also be nice to have a receive PL controlled squelch so that when a Fusion Repeater barfs out digital signals my 6700 is peacefully squelched. Of course it would be great if SDR inserted a deep/narrow notch filter for this PL tone...

They sell radios for under $1K that pull this off.

And with the beautiful 6700 it just requires a bit of reprogramming in the firmware.

I realize that people are salivating for WAN capability, and there are some out there that don't know why I don't just use a cheap UHF/VHF rig, but...

Any chance that this could be a little feature snuck in before, say, SSDR 4.0???

Just sayin'...

Vy 73,
Roy AC2GS

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.