A - B slice tuning knob detent

  • 1
  • Problem
  • Updated 7 months ago
No detent to menu on A-B slice tuning knob  - 2.2.8, 6600m. Read the manual and cannot find any menu setting to turn it on. Should it be on as standard ?
Photo of Dave

Dave

  • 13 Posts
  • 0 Reply Likes

Posted 7 months ago

  • 1
Photo of Rick  WN2C

Rick WN2C

  • 277 Posts
  • 33 Reply Likes
Not sure what you mean by detent. Push in on either slice A or B knob and the menu comes up for the receive functions.
Photo of Wayne

Wayne

  • 614 Posts
  • 84 Reply Likes
The b tuning knob and push menu only work when a second slice is active the a works when only 1 slice is active as long as its set as slice 1.
Photo of Dave

Dave

  • 13 Posts
  • 0 Reply Likes
Thank you for the reply, both are not working. I was thinking I have missed a menu to turn on the push for menu. 
Photo of Rick  WN2C

Rick WN2C

  • 277 Posts
  • 33 Reply Likes
Dave, are you running the radio as stand alone or do you have it connected to a computer via the Lan connection?
Photo of Dave

Dave

  • 13 Posts
  • 0 Reply Likes
Stand alone 
Photo of Rick  WN2C

Rick WN2C

  • 277 Posts
  • 33 Reply Likes
Dave, when you push in the the VFO A knob that is where the receive menu is. Same on VFO B when that slice is active. Have you tried pushing in on the VFO A knob? Email me k2dlz at yahoo dot com
(Edited)
Photo of Dave

Dave

  • 13 Posts
  • 0 Reply Likes
Hi Rick, I have tried pushing in the VFO A and VFO B when B slice is open, it has no response. I have tried pushing it in and holding for 5 seconds but both have no response. 
Photo of Rick  WN2C

Rick WN2C

  • 277 Posts
  • 33 Reply Likes
Dave, if you get no response from the VFO knobs you might want to open a help desk ticket.

https://www.youtube.com/watch?v=r8nk7K3gjGo
(Edited)