Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

6600 bad signal in ssb mode

Mikhail
Mikhail Member
I have bad signal on the new flex 6600. I got it 2 weeks ago. I make audio record by second reciever - bad signal. Recod from "mic stream" is very good. What can I do to have ssb good signal? I am using headset radiosport with mic em56.

Comments

  • Lasse Moell
    Lasse Moell Member ✭✭
    edited July 2018
    I had terrible TX audio from my FHM-1 microphone. Was so bad people could not understand what I was saying. Changed to a new mic, keeping the coiled cable, and all was OK. It was either the connector or the cheap element. So my suggestion is to try another microphone to see if this helps. For me it did!
  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited April 2019
    Hi Mikhail

    Good work so far.  Very helpful.  

    Can you do the following tests please.  We want to make sure we have this as simple as possible.

    1. Turn all EQ off
    2. Transmit via the XVTR port in an antenna
    3. Turn COMP off
    4. Make sure that voice peaks are about 80% of full scale.  The peak level should never turn red.

    Let's see if your audio still sound poor.  

    Please let me know how you make out.  

    Mike va3mw

  • Bill -VA3WTB
    Bill -VA3WTB Member ✭✭✭
    edited July 2018
    Lasse, this does not apply, as he is using a Radio sport headset.
  • Bill -VA3WTB
    Bill -VA3WTB Member ✭✭✭
    edited July 2018
    Mike is giving you good help.
    If you could get on the air with some of us we could get you fixed up in no time. Then we could hear what is going on.
  • Roger_W6VZV
    Roger_W6VZV Member ✭✭
    edited May 2019
    One thing to watch out for is RF getting into the radio.  Toroid cores on the ethernet cable is not a bad idea.
    de Roger W6VZV
  • Mikhail
    Mikhail Member
    edited July 2018
    Signal from xvtr more better!
  • Wayne
    Wayne Member ✭✭
    edited July 2018
    Make sure dexp is off until you get everything setup ok.
  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited April 2019
    I have converted this to a helpdesk ticket.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.