6500 with v1.6 CW keying

  • 1
  • Question
  • Updated 3 years ago
  • (Edited)
I notice that with v1.6 CW keying from CWX or an external program such as N1MM activates the ptt tx even when Breakin is off. This is a nuisance when just wanting to check the keying etc. Whilst Keying from N1MM is perfectly ok keying from Logger 32 Morse function has incorrect spacing and is unusable. Has anyone experienced similar or know of a workaround?
Photo of Mal G3PDH

Mal G3PDH

  • 48 Posts
  • 2 Reply Likes

Posted 3 years ago

  • 1
Photo of Al K0VM

Al K0VM, Elmer

  • 581 Posts
  • 94 Reply Likes
Mal,
  What methode are you using to key the radio from L32 morse ? In SSDR CAT i have created a Winkey port and in my L32 CW machine I have confiured to use WInkey ( not WInkey2) and selected the Winkey port that I created in SSDR CAT control panel..  CW sounds fine to my non-CW-expert ear..

AL, K0VM
(Edited)
Photo of Mal G3PDH

Mal G3PDH

  • 48 Posts
  • 2 Reply Likes
Al, yes, i have set up a Winkey port and set L32 to use that in the Cw machine. The characters are sent correctly but the space between characters is not correct. It is too long. Keying in the same way from N1MM is perfectly correct.