6500 Indicator is Solid White while Powered Off

  • 1
  • Question
  • Updated 3 years ago
  • Answered
  • (Edited)
I've noticed my 6500 is displaying a solid white/amber color when turned off / or when 12 V DC is applied to the radio before turning on.  GPSDO is NOT installed on this radio.  Should I be concerned or is this a software glitch of some kind?  This seems to have happened after updating the rig to v1.9.9  After pushing the power button the rig comes up full green as it should.  It never used to do this....

Cal/N3CAL
Photo of Cal Spreitzer

Cal Spreitzer

  • 449 Posts
  • 113 Reply Likes

Posted 3 years ago

  • 1
Photo of David

David

  • 304 Posts
  • 51 Reply Likes
Official Response
Do you have Remote On enabled on the Radio Setup - Radio tab?
Photo of EA4GLI - 8P9EH - Salvador

EA4GLI - 8P9EH - Salvador

  • 1782 Posts
  • 547 Reply Likes
+1
Most likely Remote ON enabled. I agree with David on this one.
Photo of Cal Spreitzer

Cal Spreitzer

  • 449 Posts
  • 113 Reply Likes
Thanks Guys!  "Remote On" was enabled!    I had searched through both the latest (Sept 2016) Hardware and Software Manual but it makes no mention of the solid white indication and the Remote On section does not mention it either.  Maybe Flex can take note and update their manual. 

73  Cal/N3CAL 
(Edited)
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9186 Posts
  • 3550 Reply Likes
I just submitted a defect to have the doc updated.  Thanks.

This conversation is no longer open for comments or replies.