6500 and palstar AT-AUTO

  • 2
  • Question
  • Updated 4 years ago
  • Answered
i want to connect my 6500 to AT-AUTO   using my COM PORT 
will I need  serial interface    between the computer and the tuner?
trying to use DDUtil    config com #1    in repeater 1  
9600 baud  (as in at-auto) and ck palstar  

but do i need a interface in the rs232 line 

flex 6500   1.3 software 
windows 7  on i7 machine 
latest  DDUtil 3.0.9

i have nothing else  running with DDUtil 
the only other  i have in  ddutil   is  :
features, radio slect   checked signature  and  port com7 
from  smart cat  com7-17 (shared)
Photo of jim WB5AAA

jim WB5AAA

  • 41 Posts
  • 4 Reply Likes

Posted 4 years ago

  • 2
Photo of Mack McCormick

Mack McCormick, Elmer

  • 324 Posts
  • 116 Reply Likes
Yes, you will need a physical com port from the computer to the Palstar. Ddutil has detailed setup instructions online. Just read the Ddutil manual.
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1208 Posts
  • 249 Reply Likes
Just a straight through db9 male to female cable from PC physical CPN port to AT-Auto.

Make sure reset jumper in tuner is removed.

Photo of jim WB5AAA

jim WB5AAA

  • 41 Posts
  • 4 Reply Likes
thanks  MACK  and DAVID 
i just can't get it  work  correct .
it most likely  is the operator ... 
at 74 hope i live long   :)   hi hi