6400m audio problem on FDX monitoring

  • 1
  • Question
  • Updated 2 months ago
  • (Edited)
Hi all  What am I doing wrong? Using FDX to set up profiles and the sound quality is like I am in a huge echo chamber or a special amplified effect is on. Below are my settings. I used Ken's video as a guide. The audio itself is responding from the changes and sounds ok beneath the amplified  effect. Happens w Heil HM Pro and FHM-2 If I record myself the effect is not present on playback.

My settings:

Slice A transmit ant. XVTA. RX ant.1  Audio muted
Slice B transmit ant. OFF    RX ant.1  Transmit  XVTA but OFF
Rcv Filter 2.9K
FDX on
DAX 1 enabled
DEXP set as needed
TX Filter 100/2900
MON  OFF
Pwr level: 1%

This  effect is stronger with the processor on and very strong when DX is on.
 I believe my MIC profiles include default settings  for each mic. Any thoughts much appreciated.

Bob W1AGC


Photo of Bob

Bob

  • 29 Posts
  • 6 Reply Likes

Posted 2 months ago

  • 1

Be the first to post a reply!