6400 not selecting bands

  • 1
  • Question
  • Updated 2 months ago
6400 will not select 17m or 15m when using the maestro or the iPad.

Works OK if selecting via MacLogger DX on the MAC

Fault is obviously in the transceiver.
Photo of Phil

Phil

  • 2 Posts
  • 0 Reply Likes

Posted 2 months ago

  • 1
Photo of Mack McCormick

Mack McCormick, Elmer

  • 378 Posts
  • 130 Reply Likes
Phil,

I recommend the following steps. 
1. Export your profiles.
2. Restart your 6400 and hold down the power key for about 5 seconds when powering on to reset the radio.
3. Import your profiles but UNCHECK Preferences. (shown highligted)


Mack
W4AX
Alpha Team
Photo of Phil

Phil

  • 2 Posts
  • 0 Reply Likes
Sorted  !

But why did it get into this state ? Is this to be a common occurrence ?

Just got the Flex setup a couple of weeks ago - I have been looking at them for some time - been running a full K3 station since they first came out - 6400 and Maestro is certainly an interesting radio

Phil G4UDU
Photo of Mack McCormick

Mack McCormick, Elmer

  • 378 Posts
  • 130 Reply Likes
Phil,

I can't say why this occurred but this has never happened to me and I've been running Flex radios since the very first pre-production models. 

Chalk it up to a Gremlin somewhere. If you follow the K3 reflector all radios have an occasional issue. 

73,

Mack
W4AX