Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

6400 DOESN'T TRANSMIT IN FM/NFM WITH EITHER + OR - OFFSET WORKS IN SIMPLEX AND OTHER MODES.

Bill
Bill Member
edited May 2018 in SmartSDR for Windows
My first Flex radio. Loving it except - The 6400 doesn't transmit in either FM or NFM with either + or - offset.  It does transmit in simplex FM & NFM modes and other modes (USB, CW).  I tried cold boot several times (6400 OFF, PS OFF & disconnected for more than a minute, reconnect, PS ON, 6400 ON).  same result.  NO XMIT! Running SmartSDR 2.2.8.

Comments

  • Craig_KØCF
    Craig_KØCF Member ✭✭✭
    edited May 2018
    Check your offset frequency. You may be trying to transmit out-of-band if it set to an incorrect value.
    73,
    Craig, KØCF
  • Bill
    Bill Member
    edited May 2018
    Thanks.  That was it. -500 MHz instead of 500 KHz.  

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.