Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

60 meters on the 6300

N3NER
N3NER Member ✭✭
edited March 2018 in FLEX-6000 Signature Series
I just got a new 6300 and sold my Icom.  I have used 60 meters in the past and it seems 60 meters is disabled for TX.  How can I get this opened up?

Answers

  • N3NER
    N3NER Member ✭✭
    edited March 2018
    I tried all the modes and the TUNE and MOX button stay grayed out, the only mode it does not stay grayed out is CW. 
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    What is your call or QTH Nick?
  • N3NER
    N3NER Member ✭✭
    edited December 2016
    W2NER
  • N3NER
    N3NER Member ✭✭
    edited December 2016
    Oh, and my QTH is Hopewell junction NY
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited August 2017
    All radios sold in the US have the 60m band enabled.  However, you must be within a designated channel in order for TX to be enabled.  I suspect your slice is tuned to a frequency that is outside of the 60m channel.
  • Jean Drolet
    Jean Drolet Member ✭✭
    edited September 2017
    Tim,  i have the same problem i live in canada at 5.370mhz 60m it's not activated

    http://www.rac.ca/rac-0-30-mhz-band-plan/
  • Cal  N3CAL
    Cal N3CAL Member ✭✭
    edited March 2017
    Double check your TX bandwidth.  It should be less than 2.8 khz

    Cal/N3CAL
  • Jean Drolet
    Jean Drolet Member ✭✭
    edited September 2017
    3000khz it's ok thank's :) 
  • Brian_KF4IRE
    Brian_KF4IRE Member ✭✭
    So I have the same problem. I have double checked the frequencies, USB, 2.7 width, under 100w and it still doesn't enable. Haven't tried CW but that's not what I want to try 60m with. So, my assumption is I need a ticket open too? Any other suggestions?
  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    Please post a screen shot of SmartSDR while you are on 60M.

    • what VFO frequency?
    • Your High and Low pass Mic settings

    If your TX doesn't enable, you are somehow 'out of band'.

    73

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.