2nd transverter on 6300 ?

  • 1
  • Question
  • Updated 3 years ago
  • Answered
i got a 2m transverters from the Ukraine and it works well,
is there a way i can add a 2nd transverter for another band ?
there's ony 1 transverter output on the 6300
cheers rob
Photo of Rob Blackie

Rob Blackie

  • 122 Posts
  • 8 Reply Likes

Posted 3 years ago

  • 1
Photo of hans weijers

hans weijers

  • 31 Posts
  • 8 Reply Likes
I am using a diecast box with 2 transverters (2m and 4m) build in. The alu box is also the cooling for the TX-Fets. 1 input from the Flex6300, 1 output to the 2m/4m/6m EA-antenna and a 2m/4m relay switch in the alu box, connected to the ACC PTT. With 1 toggle switch on the front of the box and a couple of indication leds it works perfect. Just choose the 2m or 4m tranverter in the flex6300 menu and take care to set the 2m/4m switch from the tranverter box in the correct position.
10W on 2m, 10W on 4m and a lovely overview of those band on the waterfall display.
73, Hans PA0HWB
Photo of Bob - G3WKW

Bob - G3WKW

  • 38 Posts
  • 4 Reply Likes
I just put together a second transverter with the attenuator board so I could use it with 28MHz from ANT2 , planning duplex capability for satellite working. But then finding I can't transmit where I want as considered out of band! So I may revert to your solution and forgo the duplex,. I have a 6300.