1.7.30 locks up

  • 3
  • Problem
  • Updated 3 years ago
  • Solved
Just had my 6300 lock up. SSDR froze, and a steady beep from the speaker. I had to hold the power button in for about 5 seconds to get the radio to reboot. Running windows 10 radio is in CW mode. 1.7.30 has been running OK. I installed it about when it was released. I usually run the radio about 16 hours a day with no problems.

Don't expect a fix, just reporting a lock up for the benefit of everyone.

SOAP BOX TIME:

BTW when I did a search on the above title I got over 5000 hits. I am not going to read 5000 post.
Very hard to find answers to problems that may have already been addressed. Makes for a poor user experience. 

I am a little disappointed in the quality of the software. It seems like things that use to work now have problems and reported problems have not been addressed. It also seems like Flex is more interest in the networking of the 6000 so someone sitting in their backyard can operate their radio  with their iPhone, rather then worry about the actual quality and reliability of the radio. 

This is my opinion only. The service people have done a great job. Have always help when problems a raise.
Photo of Dave

Dave

  • 98 Posts
  • 14 Reply Likes
  • things could be improved.

Posted 3 years ago

  • 3
Photo of Lewis Cheek

Lewis Cheek

  • 240 Posts
  • 42 Reply Likes
Have had it happen myself. :( My hope is  now  we have MAESTRO ( I HAVE ONE ) FRS will move on and work on software issues. I purchased my MAESTRO so I would have KNOBS, I DON'T need all this networking stuff, but I DO need a radio that works as it should. :)

Lew
N4CO
Photo of Jerry - W2TXB

Jerry - W2TXB

  • 90 Posts
  • 17 Reply Likes
Tim posted in another thread that this is being investigated. Maybe a fix will be available soon. I have not had the problem here since turning off DAX and shutting down FLDigi (which also disconnects the CAT connection) a week ago; maybe there is a connection (no pun intended) between themy.
Photo of Tom O'Boyle

Tom O'Boyle

  • 28 Posts
  • 3 Reply Likes
Had same problem - 3 times this weekend in 4 hours of operating time using 6700 and PC interface.  Is there a log file or something we can look at to give a clue?
Photo of Walt - KZ1F

Walt - KZ1F

  • 3040 Posts
  • 645 Reply Likes
Disclaimer: there is no way I am going to install 1.7. Nor will I install any release for, likely, at least a month after release to gauge it's in field reliability. However, I have had that problem and it was RF induced.
To that end:
Ensure you have a solid single point ground.
Ensure you have a very short path to earth.
Add ferrite where there are long runs and at the radiator end of your coax.
ARRL has good articles on the subject that do not involve product marketing.
Photo of Dave

Dave

  • 98 Posts
  • 14 Reply Likes
I actually was running 1.5 before upgrading to 1.7. 1.5 was very reliable and I knew what issues it had. I only upgraded because I did not want to get too far out of date. I skipped 1.6 all together. 

BTW I was not transmitting, only listening. So NOT an RF problem. I have run many hours of CW and JT9 with no issues.

Thanks for comment.
Photo of Varistor

Varistor

  • 334 Posts
  • 74 Reply Likes
Were you adjusting receiver filter bandwidth and center frequency by any chance? I had a 6500 on loan, running in its own clean Windows 10 environment with nothing else but N1MM+, and about 10% of the time tweaking the filter resulted in SSDR locking up and producing a high pitch tone. CW and Phone.
Photo of Lewis Cheek

Lewis Cheek

  • 240 Posts
  • 42 Reply Likes
In my case, at least once ( only has happened twice ) rig was just running along in receive. 

Lew
N4CO
Photo of Tom O'Boyle

Tom O'Boyle

  • 28 Posts
  • 3 Reply Likes
Thanks for the thoughts.  Its probably not RF as it is on receive and just locks up.  Also, same setup for 6 months plus without this issue with no cabling, ground, antenna changes.  Guessing it is software related.
Photo of Walt - KZ1F

Walt - KZ1F

  • 3040 Posts
  • 645 Reply Likes
Hmm, I agree, tough to have an RF problem when in receive only.
Photo of Walt

Walt

  • 236 Posts
  • 75 Reply Likes
went back to 1.6.21 - it may have problems but at least I can run it month after month without it failing on me.

But I do not have a maestro and I do not do remote stuff - so it is an alternative for me.

All my hopes for them to chase out the nasty buggies for the next release.

Cheers
Photo of Walt - KZ1F

Walt - KZ1F

  • 3040 Posts
  • 645 Reply Likes
I concur Walt. It is my sincerest hope the last point release of 1.x is a bug squashing effort only.
Photo of Rob Blackie

Rob Blackie

  • 122 Posts
  • 8 Reply Likes
not  even got my radio yet ( comes tomorrow ) regretting buying it already .. at THESE prices it should be 100 % rock solid !
Photo of Tony C kc2dis

Tony C kc2dis

  • 79 Posts
  • 5 Reply Likes
For what it's worth I'll contribute my two cents. I love my flex 6500. I think it's one of the best radios I've ever owned. I guess I just expect more out of a $4000 radio. All that being said I couldNt be happier.and I realize SDR is still in its infancy and some re and I realize SDR is still in its infancy in some respects. That being said I guess we should all expect some bumps along the road. I think the people at flex are doing the best they can.
Photo of Rob Blackie

Rob Blackie

  • 122 Posts
  • 8 Reply Likes
whatever jay, whatever,, your the passive aggressive one who just could not keep it shut.. not me..
Photo of Tony C kc2dis

Tony C kc2dis

  • 79 Posts
  • 5 Reply Likes
Everybody remain calm its all good
Photo of Jay / NO5J

Jay / NO5J

  • 1674 Posts
  • 262 Reply Likes
Rob

Well you started it ...
Didn't you.
Perhaps you can figure out how to stop it.

73, Jay - NO5J
Photo of Rob Blackie

Rob Blackie

  • 122 Posts
  • 8 Reply Likes
if you say so jay.. seems to me YOU were the one trying to take the piss, anyway , don't reply, im not interested in conversing with you.
Photo of Tony C kc2dis

Tony C kc2dis

  • 79 Posts
  • 5 Reply Likes
Same here had it happen three times! Disappointing to say the least
Photo of Lewis Cheek

Lewis Cheek

  • 240 Posts
  • 42 Reply Likes
While I don't drink FRS Kool Aid, or any other brand Kool Aid, I think for most part FRS does a good job with product. I do find it a bit disconcerting that so many problems / issues / enhancements were side lined while working to get Maestro developed and released. My Maestro works, for most part, as I expected. Now if FRS will resolve cw latency and get Maestro WinKeyer to link to external programs so I can junk my external WinKeyer I'll be impressed.

Lew
N4CO
Photo of Walt - KZ1F

Walt - KZ1F

  • 3040 Posts
  • 645 Reply Likes
Whether it is a 15 person staff, a 30 person staff, or a 13,000 person staff; there is only so much you can do in a day, week, month, quarter, year. I've worked, in software engineering, in start-ups and very large organizations. Projects need to be prioritized. The smaller the company, the more revenue focused, they have to be. That said, allowing the bug list to grow very quickly leads to an unmanageable situation.  I am sure FRS is keenly aware of that. I would also suggest having a software induced product freeze up is a sev-1 bug, especially compared to having nicer decorators on graphical controls, the later being a request not a bug.
Photo of Drax

Drax

  • 99 Posts
  • 13 Reply Likes
Open a support ticket with Flex.  They helped me with this issue.  My lock up was an easy fix.
(Edited)
Photo of Walt - KZ1F

Walt - KZ1F

  • 3040 Posts
  • 645 Reply Likes
Being that it was an easy fix, that should be also easily explainable, eh?
Photo of Lewis Cheek

Lewis Cheek

  • 240 Posts
  • 42 Reply Likes
Good point Walt ! Why NOT share fix with rest of us ? Not much help around on weekends, not that I expect there should be. 

Lew
N4CO
Photo of Tony C kc2dis

Tony C kc2dis

  • 79 Posts
  • 5 Reply Likes
I did this and was told it was a software issue. They then converted my ticket status to "resolved"
Photo of Phil m0vse

Phil m0vse

  • 208 Posts
  • 38 Reply Likes
This is my main gripe with FRS support, "resolved" generally means, "we know what the problem is and will fix it soon". 

Personally I would prefer that tickets with the same problem are given another status so that people with the problem can be kept informed with progress on a fix, maybe even then providing a test build but FRS don't seem to work this way?
Photo of Rob Blackie

Rob Blackie

  • 122 Posts
  • 8 Reply Likes
yep, that's an old trick..
Photo of WW1SS - Steve

WW1SS - Steve

  • 804 Posts
  • 269 Reply Likes
I just don't know why all these "Alpha" testers didn't catch any of this stuff. I guess it was 100% when they tested it for all those months. One guy even had 5 or 6 maestro's on a DXpedition and there were no bugs then???
Photo of Jay / NO5J

Jay / NO5J

  • 1674 Posts
  • 263 Reply Likes
Dave

The Search function in the Community is next to useless most of the time.

However I narrowed down your 5000 hits to 60 hits by using Advanced Search

Searching for "locks+up".
And filtering the results to only show activity in the last 90 days.
v1.7.30 was released May 5, 2016

Filtering to only to show threads tagged as problems.
Filtering to only show threads tagged as 6300,6500,6700 models, and SmartSDR for Windows.
and then sorting so it lists the most recently created thread first.

At the moment, this thread is the second result. and there are only 6 other results found this year,

I just want to pass on the fact the the search function in the Community isn't good,



I'm not arguing.

This problem has been reported more than once since the release of v.1.7.30.
It just hasn't been reported 5000 times yet.
And it seems the Search gadget can't even locate any, other than your thread.

You did submit a HelpDesk ticket, right?

I don't have a Kool-Aid drinking problem, I'm not a member of any FanBoy club, which will be hard for me to prove, with 3 Flexradio's in my shack.

Your correct to complain when things go wrong.

I do.

Just did in fact.

No harm, No Foul, No Offense, intended.

73, Jay - NO5J
Photo of Walt - KZ1F

Walt - KZ1F

  • 3040 Posts
  • 645 Reply Likes
And that reaction speaks volumes Phil. Help tickets are for hardware issues, or suspected hardware issues. I was referring mainly to non hardware questions of a technical naturr, where I want a correct technical answer not some wise-in-himer retort.

Someday, over a couple of beers, I'll tell you what I think of community enhanced.
(Edited)
Photo of Phil m0vse

Phil m0vse

  • 208 Posts
  • 38 Reply Likes
I disagree Walt, help tickets are for hardware or software issues. This is a community support site. Exactly what form that support takes, is up for interpretation but if you want to contact FRS, I would say a direct email or submitting a help ticket is a better option. Being a community site means that you don't get to control who responds and when. 
Photo of Phil m0vse

Phil m0vse

  • 208 Posts
  • 38 Reply Likes
Only just seen your addition Walt, I have to admit that "community enhanced" can often have questionable benefit but "in theory" it means that more experienced users can help newbies with what to them are simple issues.....
Photo of Walt - KZ1F

Walt - KZ1F

  • 3040 Posts
  • 645 Reply Likes
Phil, the sanitary version of my 'over a couple of Beers' remark is my view of precisely your last sentence above which, phrased differently, "if I see one request an official answer, I'll respond even though I don't understand the question".
There is an awful lot of that going on.

I rest my case.
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9198 Posts
  • 3558 Reply Likes
I am going to clarify this sub-discussion.  if you have an issue, be it hardware, software or technical, it is never wrong to open a HelpDesk support ticket to get an authoritative answer. Period.  If you have a sales related issue, contact our Sales department, as we will not conduct sales business with customers on an open forum.

While we do our best to read every community post, in some cases it is just impossible to do so in a timely manner, so if you are expecting or needing a direct answer from FlexRadio, using the Community is not the reliable way to achive that goal.
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9198 Posts
  • 3558 Reply Likes
Official Response
The fix for the defect behavior of the radio locking (defect #3597) up will be included in the next release of SmartSDR for Windows.
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9198 Posts
  • 3558 Reply Likes
Let me address the Community search "feature".

1.) We are all spoiled by the advanced searching algorithms of the like of Google, Bing, Yahoo and others.  As such expectations are set high and frustration runs high when those expectations are not met.

2.) The basic search function in the Community has a wide set of parameters and with certain search phrases, will return a lot of results.  Using the advanced search feature will narrow the scope of your search and return more valid results.

3.) The Community search function also searches the FlexRadio HelpDesk and returns "hits" in the right-hand side bar.  Don't forget to use those too.

4.) In regards to #1, I personally use Google to do community searches.  You can do this by entering your search terms and the add "site:community.flexradio.com" to the end.  You get the best of both worlds; a powerful Google search that only returns hits from the Community.

5.) We have on numerous occasions complained about the GetSatifaction search function.  But we are only one of many customers.  While those who use the Community software don't pay for it directly, you too are GetSatisfaction customers.  FlexRadio is but one voice and one bug report.  Your voices number in the thousands and when published on their community (which is indexed by Google and others) it does make a major difference in raising the visibility of an issue.

This conversation is no longer open for comments or replies.