1.7.30 locks up

  • 3
  • Problem
  • Updated 3 years ago
  • Solved
Just had my 6300 lock up. SSDR froze, and a steady beep from the speaker. I had to hold the power button in for about 5 seconds to get the radio to reboot. Running windows 10 radio is in CW mode. 1.7.30 has been running OK. I installed it about when it was released. I usually run the radio about 16 hours a day with no problems.

Don't expect a fix, just reporting a lock up for the benefit of everyone.


BTW when I did a search on the above title I got over 5000 hits. I am not going to read 5000 post.
Very hard to find answers to problems that may have already been addressed. Makes for a poor user experience. 

I am a little disappointed in the quality of the software. It seems like things that use to work now have problems and reported problems have not been addressed. It also seems like Flex is more interest in the networking of the 6000 so someone sitting in their backyard can operate their radio  with their iPhone, rather then worry about the actual quality and reliability of the radio. 

This is my opinion only. The service people have done a great job. Have always help when problems a raise.
Photo of Dave


  • 98 Posts
  • 14 Reply Likes
  • things could be improved.

Posted 3 years ago

  • 3
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9199 Posts
  • 3559 Reply Likes
Official Response
The fix for the defect behavior of the radio locking (defect #3597) up will be included in the next release of SmartSDR for Windows.