Conversations
Conversations 1 - 20 of 31
I've been trying to understand Dogpark software, 20 minutes test time makes me stressful I did connect (on same network) to my flex 6600...
DAX problem
DAX problem...Flex6500, DXLab Commander, WSJT-X all workedperfectly until a few days ago... thenthe following screen shots occ...
windows 10 pro updates and SSDR 2.3.9
Greetings All....I am running a Windows 10 pro PC that I acquired this week and connecting to the radio was flawless until the updates st...
I am having problems with my 6600 connecting with SmartSDR CAT
The radio is a Flex 6600. The software is 2.1.30 SmartSDR CAT window is showing Radio Not Connected Last night while on 40m in the FT8 pa...
Very high internal noise in the 6600
Hello,
I need some help with this. All the sudden the 6600 blinked
a few times and now has a very high -65 dbm internal noise level o...
Austin ...I have a PEN Problem
Friday......I decided to Install PEN package ......Read all instructions ....seems a Piece of cake.....and found 2 ADC board instead of 1...
Spots and +0
After running SSDR with spots for awhile, I have a bunch of +0 spots on the panadapter. If I use the clear all spots option, it gets rid...
6600 Lost Connections
New Flex 6600 running SSDR v2.1.34 (Windows 10) has experienced a few lost connections for unknown reasons? The radio reboots on it's o...
6600M number two bites the dust !!!
Just found out that radio #2 (replacement) also has hardware issues and needs to go back to Texas. So after 9 months of waiting (7 mont...
SmartSDR crashed, now booting 2.1.32 says it needs an upgrade and stalls at initiating hardware.
So I was monitoring 20m on the Maestro and the audio stopped. I looked and it basically said SmartSDR crashed. I rebooted it and starte...
No Audio from Microhone....on y 6600
Good Afternoon.... All seem to be ready with my 6600 at my Shack......so I decided to adjust EQ for my PR40 ( for some reason my profile...
CAT Control Error with WSJT-X V1.8.0 r8193 to SSDR 1.10.16
Hi folks I am currently facing a strange effect by using WSJT-X V1.8.0 r8193 with CAT Control to my FLEX-6300 SSDR V1.10.16. CAT Sett...
Flexcontrol works intermittently with SmartSDR V1.10.16
I recently updated SmartSDR to V1.10.16. Since the update, my Flexcontrol knob operates intermittently. It will work for several seconds,...
Latest Update 1.10.16
I downloaded the latest update (1.10.16) and now the 6300 won't get recognized when I try to turn it on. I shut off the 6300, unplugged...
V1.10.16 problem connecting to DX4WIN and FLdigi
I just installed the latest SSDR v1.10.16. The install went just fine. DDUtil started and is running just fine but my logger, DX4WIN gi...
does not respond
I have a big problem with my flex-6300. Everything
is normal so it appears right in the left setup and once I want to
connect it, not...
Shut down problem with 6300
My 6300 abruptly shuts down and powers off. Only happens in receive - never transmit. It happens with two different computers. One wind...
So you are in Argentina? There's no TURF file for you. Screw you.
Asked for a TURF file for Argentina (where I leave), offered to help on create one using local regulations and I get this answer for the ...
i am on HRD 780 PSK31 with a 6300 and the dax will NOT transmit with 1.9.9 installed , recieve is good but no transmit
Hurricane Hermine destroyed SmartSDR files
Before the arrival of Hurricane Hermine Sep 2016 to Amelia Island; I was confined to bed rest due to lower back pain. I asked my wife to ...