Conversations
Conversations 1 - 20 of 43
I haven't been keeping up with the community like I should. I Just saw this on the Flex support site: https://www.flexradio.com/downloads...
No fuss QSK ...
Silent QSK ... a dream come true. I remember buying the Alpha 89 years ago and being somewhat dubious as to the pin-diode switching schem...
Don W2XB - Strong and Clear!
Don, I turned on the radio after work today and 40m was full of RTTY so I dived down low and saw a big signal at 7.027 and there you wer...
Show Us Your FlexRadio In Your Shack
I thought it might be fun to have us Flex users show a picture of their FlexRadio in
their shack.
Here is my 6600M in
my shack. It's i...
Real RTTY using a Flex6000 Series
The Flex6700 is talking to the HAL ST-6 terminal unit, which is then connected to a Teletype Model 28 KSR. I just a few hours ago conclu...
I just tempted myself...
With one of our systems at work we are thinking of shipping a Dell 38" curved monitor, ultra high resolution. Well I decided for our Chr...
My own logging/control software - Why I love Flex
*** Warning - Long Read - Sorry I am a nerd. Lets just get that out in the open first.Far more than operating I like building, creating...
6600 back safe - A few panic moments
Hi all, After the fan issues Flex came through, replaced the fan and the 6600 arrived yesterday. I turned it on and ran it overnight on...
FRStack Version 2.1.30.4 Released
FRStack has been updated to work with FlexRadio Systems next generation radios.FRStack will work with your 1.X and 2.X based radios.FRSta...
WPX fun
Hi all, Not a big contester but I have been working on my CW so this was a chance to go and get fast. I managed with only about 5 hours...
6600 Reliability... So far...
I would like people to remember this is a "support board". Often on support boards and I'd run quite a few over the years all you hear i...
Has to be a new record! - Great job FRS!
Flex 6600: Ordered: 02/10/2018 Invoiced: 03/27/2018 Paid: 03/27/2018 Tracking number received: 03/30/2018 The pace is picking up!
Praise for Flex Customer Service
I visited Flex's offices in Austin today to pick up my new 6600 and drop off my old 6500 for trade in credit. Katie in shipping and recei...
CQ CONTEST!!
20 meters is a bit busy today!!
Surgeon wouldn't allow Maestro on operating table ...
Difficult to rate this posting ... hardly a problem! I am in ICU after a Code Blue episode from an errant nerve block (stopped my heart) ...
Maestro Online - In The Bar!
Great reception at the bar, as the joint's WiFi works OK. Oh, and that's a nice snifter of Courvoisier XO cognac my brother Jim, KA7GZR, ...
dogparkSDR - MAC OS/X client for FlexRadio 6000 series
For those who have not seen it, DogPark Software, the authors of MacLogger DX, MacLogger DX HD (iPad logger) and MacDoppler have relea...
Flex Direct Conversion Receiver - My HeathKit QRP HW-8 CW XCVR from 1968 is also a Direct Conversion as well had lots of Fun with it !
Flex Direct Conversion Receiver - Fun Radio - My HeathKit QRP HW-8 XCVR from 1968 is also a Direct Conversion Receiver a well had lots...
iOS to Pitcairn Island
Quick praise for the 6500 and SSDR for iOS. Just worked VP6J from my desk at work. Two calls. CWX.
Too cool for words, so here's a pho...
Flex and Elecraft at Huntsville Hamfest 2016
Eric Schultz presented a one hour talk on the benefits of Elecraft this weekend at the Huntsville, Alabama hamfest. The next presentation...