Conversations
Conversations 1 - 20 of 21
I hooked up my G5RV test antenna to try out the 6700 on 80 thru 10 meters. The SWR varies on each band but is in reasonable range, but no...
My 6700 Keeps Locking Up
My 6700 has begun to lock up 4 or 5 times a day. I have to turn off the radio and restart it to bring things back. I have also experience...
Two Minor Bugs
I'm using ver 1.4.3. (1) at times when switching from SSB to CW the VOX remains engaged and can interrupt receive by triggering MOX if ...
Need Help With Audio
I installed SmartSDR 1.4 on two different notebooks, an old HP Lenovo T61 running Windows 7, amd a brand new Dell XPS, fully loaded and r...
lost DAX control panel
DAX control panel shows up in the tray, but it can't be opened. I tried reinstalling v1.4.11 but didn't help. By the way, I am confused, ...
Digital Mode Headache
Using fldigi and DAX.....sometimes it works, sometimes it doesn't. It worked in the beginning, Now, it mostly doesn't work. I have tried ...
My Flex 6700 DIGIU will not work with Line in, but OK using USB
On 2 meter eme transmit cycle I use MAP65 on another computer to send transmit tones to my 6700 through the LINE input. If I use the USB ...
PTT not working on 2 meters (144 mHz)
The PTT is not functioning on 2 meter band. KB8RQ brought this to my attention, I tried it, and confirmed it is not working for me either.
Flex Virtual Ports, where?
I do not see Flex Virtual Ports created in Smart CAT showing up in device manager ports. Should they be there? I am having difficulty acc...
SmartSDR CAT com ports, what's up with this?
Are comports generated by SmartSDR CAT independent of com ports shown by Device Manager? On occasion when I generate a new pair of ports ...
My 6700 has slight ringing sound when in SSB mode
My 6700 has a slight ringing sound when in SSB mode. I do not notice any expansion of bandpass width no matter which filter is selected...
Cannot Remove FlexVSPInstaller_64
I have just upgraded to Windows 10 and am trying to follow the SmartSDR v1.7.3 uninstall procedure. I see FlexVSPInstaller_64.msi, but I...
TX1 Keeps Disabling Itself.
The TX1 keeps disabling on its own from time causing amplifier problems. When it does disable itself, it doesn't matter if I change the k...
DAX not working on TX
Was working , but no more. I have tried all 3 of my digital programs and DAX TX does not work with any of them. Yes, I've checked numerou...
Quit Muting The Audio Automatically, I'll Do That
When I add a new slice (as with split operation) the audio is muted in one or the other slices, and sometimes both. I find this very aggr...
An Easy Way to Wire your 6000 for Digital Ops - OUCH!
I purchased one of the monoprice.com HD15 to BNC Male cables and find that pins 4, 5, 6, 7, 8, & 11 are all internally grounded! This is...
My GPSDO will not connect
My GPS will not connect. The antenna is in the same location as my navigation GPS which has no problem locking to satellites. The indicat...
SmartSDR Failure
SmartSDR 1.5 fails at times, giving the following message.
SWR readout incorrect
Is the SWR indicator considered to be fixed and correct? My 6700 shows way too much SWR when the antenna is connected to a 1:1 dummy load...
Mic PTT no longer works, among other strange things
The Flex supplied FHM-1 mic push to talk no longer works, it stopped working today. I tried different mic's and get the same result; no s...