Conversations

Conversations 1 - 20 of 35
Photo of Steve - N4TTY
Slice frequency display partially covered by text in upper right of slice flag
I've notice that the frequency displayed on the slice flag is partially covered by the text in the upper right corner of the slice flag. ...
  • 1 me too
  • 9 replies
  • Question
Photo of Mike Presnell
Mastro cant connect to Cell Phone WiFi
My Maestro works perfect with my home WiFi. Trying to connect to my IPhone as a Personal HotSpot:   it sees my Hotspot, and asks for the...
  • 3 me toos
  • 4 replies
  • Question
Photo of John 2E0XLX
Flex Maestro Factory Reset
Hi All, A Maestro unit has recently come into our possession to go with our Flex 6300, due to a very generous donor. However it looks as...
  • 1 me too
  • 4 replies
  • Question
Photo of Roy Laufer
Anyone noticing any Radio lock-ups with 2.1.32?
I was quite happy with 2.1.30, but that cautionary notice regarding Maestro's draining their internal battery caused me to boot my Maestr...
  • 4 me toos
  • 13 replies
  • Problem
  • In Progress
Photo of John - WA7UAR
Has anyone utilized HamWAN for remote operation of a Flex 6x000?
HamWAN is "a modern, multi-megabit, IP-based, digital network for amateur radio use" and is currently available in the regions around Sea...
  • 1 me too
  • 3 replies
  • Question
Photo of Clay N9IO
Latest Bouvet pic. Flex 6500 and Maestro. 1-22-2018
Flex 6500 and Maestro on the way to Bouvet. Pic courtesy NV9L. 1-22-2018
  • 3 me toos
  • 1 reply
  • Praise
Photo of Steve - N4TTY
Sharing two or more 6000 Series Radios with two or more users using v2.x.x SmartSDR
Is there a best practices guide as how you would set things up to share 2 (or more) 6000 series radios among 2 (or more) users?  I saw th...
  • 2 me toos
  • 4 replies
  • Question
Photo of Steve - N4TTY
ARRL RTTY RU Contest 2018
Just a little less than 24 hours until the contest begins and I'm not going to be participating. I picked the "Conversation Type" as "Pr...
  • 1 me too
  • 1 reply
  • Question
  • Doesn't Need an Answer
Photo of Dick Illman
NEED DAX with SmartLink !
I have been using the new FT8 mode remotely on my LAN. I really want DAX to work on WAN connections too. I hope that the router ports wil...
  • 4 me toos
  • 6 replies
  • Idea
  • Under Consideration
Photo of Steve - N4TTY
FlexRadio and RTTY with Heavymetal
Has anyone interfaced the Flex with a TU (in my case a Dovetron) via the Accessory connector?  I'm sure many of you have used DAX and ext...
  • 1 me too
  • 6 replies
  • Question
Photo of Chris DL5NAM
Santa works with Flex
  • 1 me too
  • 4 replies
  • Praise
Photo of David Livingston
RMS Express - Winlink - Any issues with SmartSDR v2.0.19.98. Any Install issues.? Thanks K4CAE
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of W3EX -- Tom
Time wrong when Maestro boots up.
I have noticed that when my Maestro boots up that the time that flashes up is three hours off from my time. Probably not of any consequen...
  • 1 me too
  • 4 replies
  • Problem
  • Not a Problem
Photo of Steve - N4TTY
What causes the "Remote" button just to the left of the speaker and headphone icons to be "dimmed" out?
What conditions make the "Remote" button dimmed out versus being able to enable or disable remote audio/microphone?
  • 1 me too
  • 3 replies
  • Question
Photo of Steve - N4TTY
SmartLink & Port Forwarding
I'm having issues similar to Andrew Thall, but didn't want to cloud his thread with responses to my question, so started a separate conve...
  • 3 me toos
  • 13 replies
  • Question
  • Answered
Photo of James Madden
Wemo link for remote powerup/down device
Need Link for Wemo Device that will work with my 6700 for powerup down using internet
  • 2 me toos
  • 17 replies
  • Question
  • Answered
Photo of Steve - N4TTY
SmartCat issue after latest Win10 upgrade
After latest Win10 upgrade (7/31/2017) I get the below message when SmartCat tries to start.  Do I really need to open a help desk ticket...
  • 1 me too
  • 7 replies
  • Problem
  • Solved
Photo of ka7gzr
Sneak Peak of Smartlink
Thanks Tim! This gets me more prepared for the upcoming release. Interesting date on the cover page...Jimka7gzr
  • 4 me toos
  • 9 replies
  • Praise
Photo of James Skala
If I purchased my radio less then a year ago do I have to purchase a lic
SmartLink purchase question for newer radio owners.
  • 3 me toos
  • 13 replies
  • Question
  • Answered
Photo of Steve - N4TTY
Maestro and 5GHz
I'm trying to use a Ubiquity 5GHz NS5M router to connect my Maestro.  But I'm not seeing the 5GHz SSID on the Maestro (see 2GHz SSIDs fin...
  • 1 me too
  • 8 replies
  • Question